1) elastic supported edge
弹性支承边
2) elastic bearing
弹性支承
1.
Design of elastic bearing mechanism in step height contact measuring instrument;
接触式台阶测量仪弹性支承机构的仿真设计
2.
Analysis for interior forces of statically indeterminate structures with elastic bearings
含有弹性支承超静定结构的内力分析
3.
The method of resolving vibration,noise and power waste by designing a new elastic bearing is introduced.
纺纱锭子失效的一个重要因素是其支承装置的摩擦和磨损,为此,试通过设计一种新型的弹性支承,解决锭子的振动、噪音和功率损耗。
3) elastic support
弹性支承
1.
Approach to tuning natural frequency of variable stiffness elastic support of 3D vibration strengthening polishing vibration table;
三维振动强化抛光振动台变刚度弹性支承调谐固频的探讨
2.
The bucking analysis and application of axial compression members with elastic supports;
弹性支承上轴心受压构件的屈曲分析及应用
3.
Analysis of Elastic Supported Single Span Skew Girder;
弹性支承单跨斜梁的分析研究
4) elastic supporting
弹性支承
1.
The influence of elastic supporting column on integral stressed membrane structure
弹性支承柱对整体张拉膜结构的影响
2.
The design formulation of rotor bearings system with large unbalance was given and a kind of element of elastic supporting was developed.
基于反共振原理和弹性支撑法研究了带大偏心量的转子 -轴承系统弹性设计方法 ,给出了大偏心量转子 -轴承系统的设计公式 ,设计了一种弹性支承元件 。
3.
The structure of the slender hammering stem with elastic supporting device isdesigned in this paper,a multiple degree of freedom vibration dynamic model is set up.
在设计出带弹性支承装置细锤杆锻锤的基础上，将其简化为一多自由度振动力学模型，并以被改造的２Ｔ气液锤锤头为例，对该模型进行了理论分析与计算。
5) flexible support
弹性支承
1.
Study on the reducing vibration effects of flexible support for film bearing rotor system;
弹性支承对滑动轴承转子系统动力稳定性的影响
2.
Research on Nonlinear Film Unstable Vibration of Bearing System Supported by Flexible Support;
弹性支承滑动轴承的非线性油膜失稳研究
3.
Then a new type of spindle, with low stiff & small damping and tri-flcxible journal bearing support, was proposed on the basis of the theory of low stiff & small damping flexible support of rotor dynamics and the theory of hydrodynamic lubrication of bearings.
本文在系统地分析了细纱锭子存在的问题和研究现状的基础上,根据转子动力学的低刚度小阻尼弹性支承理论和滑动轴承的流体动力润滑理论,提出了一种新型的锭子结构设想——低刚度小阻尼三弹性滑动轴承支承细纱锭子。
6) elastic supports
弹性支承
1.
A procedure incorporating the finite strip method with spring systems to treat plate structures on elastic supports is proposed.
采用有限条法和弹簧体系分析弹性支承结构的弯曲问题 通过弹簧模型分析 ,弹簧体系可以有效地模拟各种弹性支承体系 ,如文克尔弹性地基和双参数弹性地基 ,还可以模拟各种内支承和复杂边界条件 用线型弹簧模拟内支承 ,对连续板结构进行了数值分析并与经典解进行了比较 ,同时对弹性地基板进行了计算 数值结果表明 ,本文方法具有较好的精度 ,同时适应多种弹性支承结构的分
2.
With the finite element analysis software-SUPER SAP,Strength and stiffness analysis are made for the elastic supports of bearings in main pump of nuclear power station and some worthy conclusions are got.
采用SUPERSAP有限元分析软件包对核岛主泵主副推力轴承弹性支承的强度和刚度进行了数值分析计算 ,得出了一些有价值的结论 。
3.
Based on the fundamental theory of the cable-prestressed steel truss established in paper [1], the inversive iterative perturbation equations which can be used to determine the stiffeness of elements of the prestressed steel truss with elastic supports are put forward by using the principle of matrix perturbation and introducing the concepts of the combined elements and stiffeness factors.
本文基于文献[1]所建立的拉索式预应力钢桁架基本理论,通过引入组合单元和刚度变化因子,利用矩阵摄动原理建立了以结点竖向位移为约束,以确定弹性支承多次张拉预应力钢桁架各类单元刚度为目标的反演摄动迭代方程。
补充资料：弹性
分子式：
CAS号：
性质：除去导致变形的负荷以后，材料迅速回复其原来尺寸和形状的能力。当变形与所加负荷成正比时，该材料被认为是虎克弹性体或理想弹性体。应力和应变不满足线性关系，但仍保持单值关系称非线弹性。加载后经过一定时间后应力和应变才满足线性关系称滞弹性。
CAS号：
性质：除去导致变形的负荷以后，材料迅速回复其原来尺寸和形状的能力。当变形与所加负荷成正比时，该材料被认为是虎克弹性体或理想弹性体。应力和应变不满足线性关系，但仍保持单值关系称非线弹性。加载后经过一定时间后应力和应变才满足线性关系称滞弹性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条