1) economical contact
节电接点
2) lap joints
搭接节点
1.
Experiment on fatigue properties of one-side covering plate lap joints;
单面盖板搭接节点的疲劳性能试验
3) welded joint
焊接节点
1.
Review and analysis of researches on bending behavior of welded joint of steel tube truss;
钢管桁架焊接节点的抗弯性能研究综述和分析
2.
Behavior of welded joint of trussed columns with multiple web members in the National Stadium;
国家体育场桁架柱内柱多腹杆焊接节点性能研究
3.
Experimental study on the mechanical properties of aluminum welded joints;
铝合金焊接节点力学性能的试验研究
4) connection
[英][kə'nekʃn] [美][kə'nɛkʃən]
连接节点
1.
Nonlinear finite element analysis of CFRT connection with dentation plate;
钢管混凝土梁柱齿状钢板连接节点非线性有限元分析
2.
Based on the model tests and numerical calculation,mechanic behavior of connection between composite beam and concrete shear wall in the main building of Achieves Exhibition Hall of Pudong New District in Shanghai is studied.
以上海市浦东新区文献中心主楼组合梁与混凝土剪力墙新型连接节点为对象,通过模型试验和数值分析研究了大尺寸方钢与混凝土剪力墙的共同工作性能。
3.
To guarantee the safety of structural design, a small scale model for a new type of connection between steel beam and concrete shear wall was designed and tested under monotonic loading.
针对一种新型的钢梁与混凝土墙体的连接节点,设计缩小比例模型,并对其进行静载试验和有限元分析,试验结果和有限元分析结果吻合较好。
5) connection joint
连接节点
1.
Nonlinear finite element analysis on connection joint of a super high-rise building
某超高层结构连接节点的非线性有限元分析
2.
In this article,authors introduce connection joint types between main cable and secondary cable in cable net structure.
介绍了索网结构中主次索之间的连接节点形式,并根据国内工程实践中常用的外包PE的半平行钢索的应用情况提出了有针对性的构造上的改进,同时结合工程实例进行了讨论。
3.
Combining with practical projects, the author introduce the quality control and specific construction method of connection joints between beams, slabs, walls of underground structures and underground continuous walls in construction of the "Reverse Construction Method".
结合工程实例,介绍深基础逆作法施工中地下结构的梁、板、墙与地下连续墙连接节点的具体做法及质量控制。
6) connection
[英][kə'nekʃn] [美][kə'nɛkʃən]
节点连接
1.
This article analyzes the failure mechanism for the tensile connection using high strength bolts with extended end plate or T-shaped steel and the causes of prying action.
通过算例分析和比较了国内外几种高强螺栓节点连接考虑杠杆力作用的计算方法,为工程设计提供参考依据。
2.
It is in favor of beam-column connection and architecture design, so it has good development foreground.
本文采用试验研究、理论分析、有限元程序分析相结合的方法,对钢管混凝土柱钢筋混凝土梁新型节点连接的形式进行了系统的分析与研究。
3.
The connection is an important and complicated content in the steel frame design.
钢结构梁柱节点连接是钢结构设计中的重要内容之一，节点连接的可靠性和有效性对钢结构整体性能有着非常重要的影响。
补充资料：黏合搭接接头
分子式：
CAS号：
性质：两个被粘物部分叠合粘接在一起形成的接头。搭接比对接形式抗剪强度高，而且可靠，是一种十分普遍使用的粘接形式。
CAS号：
性质：两个被粘物部分叠合粘接在一起形成的接头。搭接比对接形式抗剪强度高，而且可靠，是一种十分普遍使用的粘接形式。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条