1) electrode breakage
电极折损
2) broken line electrodes
折线电极
1.
The 96 MHz wideband SAW filter for TD-SCDMA using tapered IDT with broken line electrodes achieves a minimum insertion loss of 12 dB, 1 dB pass band of 4.
介绍声表面波锥形叉指换能器的基本原理,采用折线电极锥形叉指换能器制作的TD-SCDMA制式用96MHz宽带滤波器,1dB带宽4。
3) electrode wastage
电极损耗
1.
The Analysis and Prevent Measures Influenced on Electrode Wastage in ElementElectron Discharge Machining
电火花加工中影响电极损耗的因素分析及预防措施
2.
The electrode structure was designed and divided for the purpose of eliminating the effects of electrode wastage on the processing dimensional accuracy,and then for manufacturing precision injection mould.
在分析手表壳结构和工艺特点的基础上,叙述了表壳电极的拆分方法,阐述了如何根据产品结构拆分电极以及采取怎样的电极结构可以消除电极损耗对加工尺寸精度的影响,如何保证高效率、高精密地生产出高质量的手表壳模具。
4) electrode wear
电极损耗
1.
In 3D scanning process of micro electro discharge machining(micro EDM),the machining efficiency and geometrical tolerance are difficult to be guaranteed due to the serious electrode wear.
进行微细电火花三维扫描加工时,由于电极损耗相对严重,导致形位公差难以保证和加工效率较低。
2.
From the electrode wearing status,it was found that there is also .
通过对电极损耗情况的观察 ,发现电极损耗特性也有一临界点 ,这一点与普通电火花加工相
5) electrode wear
电极磨损
1.
Characteristics of electrode wear in spot welding of hot galvanized dual-phase high strength steel;
点焊热镀锌双相高强度钢的电极磨损规律
2.
Experimental study on electrode wear mechanism in resistance spot welding of high strength hot galvanization steels
热镀锌高强钢点焊的电极磨损机理分析
3.
Effects of electrode wear on weld quality of hot galvanization steel with high strength in resistance spot welding
热镀锌高强钢点焊的电极磨损对焊点质量的影响
6) electrode loss
电极损耗
1.
The factors that affecting the electrode loss in EDM are analyzed from the aspects of absorption effect,polarity effect and reasonable match of electrical parameters.
从吸附效应、极性效应以及电参数的合理匹配等方面分析了影响电极损耗的因素,提出了降低电极损耗的措施 ,对提高电火花型腔加工质量、实现“高效低损耗”加工具有一定意
2.
The method of automatically measuring and compensating the electrode loss that occurring in the EDM machining was introduced.
介绍了对电火花成型加工中产生的电极损耗进行自动测量及自动补偿的方法。
3.
Electrode loss,which occurs during the electrospark moulding process can be automatically measured and compensated.
介绍了对电火花成形加工中产生的电极损耗进行自动测量及自动补偿的方法。
补充资料：折线
用线段依次连接不在一直线上的若干个点所组成的图形。各线段称为折线的边；各点称为折线的顶点，其中第一点称为起点，最后一点称为终点。起点和终点重合的折线称为封闭折线或多边形。不相邻的两边都不相交的折线称为简单折线。如果对于简单折线的任一边所在的直线，折线其他各边都在其同侧，则称此为凸折线；否则称为凹折线。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条