1) flux deflector cone
射流偏导锥
2) diversion angle of cone
导流锥角
3) cone-shaped baffle-board
导流锥
1.
The mixing effect is optimal when the space between concentric tube-arrays is 100 mm,the number of tube-array units is 3,and the cone-shaped baffle-boards are set between tube-array units.
试验结果表明,同心列管间距为100 mm、列管段数为3、列管段间设置导流锥的同心列管式混合器的混合效果最优。
4) jet deflection
射流偏转
1.
The flow-field numerical simulation data at burner region of a tangentially fired PC boiler whose burners are arranged in six corners is used, the influence of pressure distribution at burner region on jet deflection was studied, the old case and improved case of burner flow-field was contrasted and analyzed.
利用某六角切圆燃烧煤粉炉燃烧器区域流场的数值模拟数据,研究燃烧器区域静压力分布对射流偏转的影响,并针对燃烧器改进前后的流场分布进行比较分析。
2.
In this paper the authors have carefully measured the flow fields in the burner zone and pressure distribution along the adjacent wall on an isothermal model, and studied the effect of the structure and operational parameters of jet burner on the aerodynamic field in the furnace, and obtained the factors of leading to jet deflection.
实测结果表明：①燃烧器射流根部压差较大，随着射流前展，射流两侧的压差明显减小；②燃烧器射流的几何轴线与前墙夹角α增大时，射流两侧的压差就减小；③随着燃烧器高宽比（ｈ／ｂ） 的增大，壁面区域相对压力的绝对值增大，气流越易贴壁；④燃烧器只开１ 个喷口时，射流偏转比开４ 个喷口时的小得多。
3.
The research on burner jet deflection in tangential firing frunace at present is introduced in this article at first.
首先介绍了在切圆燃烧炉膛内燃烧器流偏转方面的研究现状 ,然后根据对炉内流动工况的观测 ,提出切圆燃烧炉膛内燃烧器射流的运动在本质上是横向气流射流的运动 ,在分析这个流动模型的卷吸及所受作用基础上推导出射流偏转的计算方法 ,并针对典型 6 0 0 MW的炉膛进行了计算及试验验证 。
5) the jet angle
射流偏角
6) cone water jet
锥形水射流
1.
The model of conical membrane atomization for cone water jet is presented.
提出了锥形水射流锥膜雾化模型，并对锥形水射流的雾化能力和降尘效果进行了实验研究，所得结果供从事降尘和灭火工作的研究人员和设计人员参考。
补充资料：锥角
分子式：
CAS号：
性质：是由入射粒子在固体介质材料中形成的径迹经化学蚀刻放大后产生的圆锥体之顶角，常用顶角的1/2表示。可由入射角和径迹投影锥角求得。
CAS号：
性质：是由入射粒子在固体介质材料中形成的径迹经化学蚀刻放大后产生的圆锥体之顶角，常用顶角的1/2表示。可由入射角和径迹投影锥角求得。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条