1) carburetor vacuum cylinder
汽化器真空筒
2) vacuum vaporization
真空汽化
1.
The theory and the process of a technique called vacuum vaporization is presented that the material is Vaporized in vacuum and then cooled down rapidly-which could be used to fabricate nano-matefials.
介绍了真空汽化冷凝技术制备纳米级材料实验的原理和过程,用真空汽化冷凝技术制备纳米块状锌,并用扫描电镜观察纳米锌的形貌、晶粒度,用X射线衍射测定真空汽化冷凝钠米锌的生长方式及择优取向,用显微硬度计测定了合金锌、粉状锌以及纳米锌的显微硬度,并对此进行了分析。
3) condenser vacuum
凝汽器真空
1.
The phenomena of condenser vacuum slowly running down occurred many times in Yinchuan Congeneration Power Plant.
介绍了银川热电厂二期工程投运一年以后,多次出现凝汽器真空缓慢下降的现象。
2.
During the test of the condenser vacuum of the power units in Phase 1 & 2,Beilun Power Plant in the summer,the problems of limited suck capability of the vacuum pump and affected vacuum improvement of the condenser in low loading operation have been found.
在进行北仑电厂一、二期机组双背压凝汽器夏季真空测试的过程中,发现没有配置大气喷射器的二期机组,存在着因真空泵极限抽吸能力不足的问题,影响了低负荷运行阶段凝汽器真空的改善。
3.
Has been sufferine from such problems as low condenser vacuum,too high temperature of the casing at stage 17 ang low effec of # 5 LP heater since it put into operation.
某50MW机组自投产以来,运行中一直存在凝汽器真空偏低、17号级缸温超标、5号低压加热器加热效果极差等缺陷,针对上述问题提出了具体的解决办法。
4) vacuum in condenser
凝汽器真空
1.
The establishment of multi-dimensional data model for condenser by using algorithm of Fuzzy C-means(FCM) cluster has been presented,establishing a data cube for the vacuum in condenser system,and a multi-dimensional analysis for the data cube of vacuum in condenser being carried out by using on-line analytical processing method.
介绍了利用FCM(模糊C均值聚类)算法建立多维数据模型的方法,建立了凝汽器真空数据立方体,并利用联机分析处理的方法对凝汽器真空数据立方体进行了多维分析。
5) vacuum of condenser
凝汽器真空
1.
27 single-extraction were put into operation some defects,such as low vacuum of condensers,excessive standard for the temperature of 17th cylinder extreme poor heating effect of No.
2 7单抽 1、2号机组自投产以来 ,一直存在着凝汽器真空度偏低、17级缸温超标、5号低加加热效果极差等缺陷。
2.
The vacuum of condenser is increased at the same time.
根据温差与供汽压力的关系采用回归分析和自适应控制的方法，对200MW汽轮机组的低压轴封供汽系统进行控制，保证低压轴封供汽系统随工况及环境条件的变化仍能维持最佳工作状态，从而提高凝汽器真空，使机组在安全可靠运行的基础上进行深层次节能。
6) vacuum drum dryer
真空筒形干燥器
补充资料：汽化器
分子式：
CAS号：
性质：（一）vaporizer 液体在其中加热直到汽化的设备。加热可以是间接的（蒸气或传热流体），可以是直接的（热气或浸没燃烧）。（二）carbuteter; carbutator 也指汽油机中使燃料和空气形成可燃混合物的部件。
CAS号：
性质：（一）vaporizer 液体在其中加热直到汽化的设备。加热可以是间接的（蒸气或传热流体），可以是直接的（热气或浸没燃烧）。（二）carbuteter; carbutator 也指汽油机中使燃料和空气形成可燃混合物的部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条