1) diving boring machine
潜水钻孔机
2) DTH Drill
潜孔钻机
1.
In the case of Model CS-165E DTH drill for opencast mining,SPT-K-2024 controller was used as key component of electric-hydraulic control system.
CS-165E露天潜孔钻机采用SPT-K-2024控制器作为电液控制系统的核心部件,由SPT-K-2024控制器直接驱动电液比例阀和电磁阀,接受传感器信号;通过CANO-PEN总线实现2个控制器和一个SPT-X-AT2纯文本显示器组网,极大地提高了系统的稳定性和可靠性。
2.
In order to meet the need of the large-diameter longhole drilling in underground mines and the control of slope in open pit mines,entrusted by the Chinese govern-ment,Changsha Institute of Mining Research(CIMR)carried out a study on high pressurepneumatic DTH drill.
为了满足地下矿山大孔径深孔凿岩和露天矿山边坡控制的需要，我院受国家之命开展了高气压潜孔钻机的研究工作；自１９８０年以来先后研制成功几种典型产品并在矿山付诸应用。
3.
Based on the analysis of actualities and development situation of DTH drill abroad,and compared with actualities of DTH drill at home,a development thought for our country at present is put forward.
潜孔钻机以其特有的凿孔特点占据了很大一块市场。
3) down-the-hole drill
潜孔钻机
1.
The application of down-the-hole drill in tunnel;
潜孔钻机在隧道中的应用
2.
The efficiency study of traveling hydraulic drive about the down-the-hole drill
潜孔钻机履带行驶液压驱动系统效率研究
3.
Dynamic simulation and experiment study about the rotating hydraulic system of down-the-hole drill based on AMEsim
采用AMEsim的潜孔钻机回转液压系统的动态仿真与试验研究
4) Down-hole drill
潜孔钻机
1.
Design of arm on down-hole drill based on improved genetic algorithm;
基于改进遗传算法的潜孔钻机钻臂设计计算
5) downhole drill
潜孔钻机
1.
Throgh Comparing the propeties of downhole drill with other drills, The drilling specification and fractal rules of downhole drill have been studied.
本文通过比较各类钻机的特点，分析了目前广泛使用的潜孔钻机的凿岩性能及其分形规律。
6) submersible drill
潜水钻机
1.
Large diameter drilling in mud Leaking boulder and sandpebble strata with submersible drill;
潜水钻机在漂石和砂卵石漏浆地层中大口径钻孔工法探讨
补充资料：潜孔钻机
潜孔钻机
underwater drill
q iankong zuanli潜孔钻机(underwater drill)一种钻岩石炮孔的施工机械。用压缩空气和液压为主动夕辅以电动。由于它的冲击器紧随钻具一起进入孔底行冲击钻孔，故名潜孔钻机。利用压缩空气和液压一动能，经过机体转换成机械冲击和回转熊，通过钻对岩石进行冲击破碎，并将岩粉排出形成炮孔。按用条件分为:①井下式潜孔钻机，由冲击器，柱架回转推进机构组成。不能自行移动，用在井下作山②露天式潜孔钻机，由冲击回转、推进提升、行走、{尘等机构组成。能自行移动，具有凿岩效率高、噪低的特点，在水利工程施工中广泛被采用。常用的号有YQ一巧O型，可钻直径150毫米、深17米的炮引也能钻凿一定角度的倾斜孔。尚有可钻直径80、10(200及250毫米以上的潜孔钻机。(吴树德)
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条