1) rosin-extended rubber
填充松香的橡胶
2) filling rubber
填充橡胶
1.
Study on the attapulgite filling rubber;
以凹凸棒土为原料,经表面改性处理制得填料,填充到橡胶中去,对填充橡胶的性能进行研究。
3) silicate rubber filler
橡胶填充
1.
Compared with those without silicate rubber filler, the uni-axial stress-strain curve of aluminum foams with the filler has higher and longer collapse plateau, and no conspicuous densification region.
对两种有硅橡胶填充的多孔金属材料进行了单向压缩实验 ,一种是三维开孔泡沫铝 ,另一种是二维圆孔铝合金蜂窝 。
4) filled rubber
填充橡胶
1.
Constitutive relation of thermal aged filled rubber;
热老化的填充橡胶本构关系
2.
Study on the carbon black network in filled rubber vulcanizate;
填充橡胶中的炭黑网络研究
3.
Research progress in friction and abrasion of filled rubber
填充橡胶摩擦磨损的研究进展
5) rubber filling oil
橡胶填充油
1.
A rubber filling oil was prepared by extracting a extract oil using furfural as solvent, where the extract oil was from the equipment of refining lubricant oil by solvent.
以糠醛为溶剂对抚顺石油一厂减五线馏分油溶剂精制的抽出油进行抽提,制备了橡胶填充油。
2.
The rubber filling oil was preparing using MEK dewaxed oil as raw material,adopting one stage serial connection hydrofining process with RJW-2 catalyst.
以炼油厂"老三套"生产的酮苯脱蜡油为原料,在装有RJW-2催化剂的加氢装置上采用一段串联加氢工艺研制生产橡胶填充油。
3.
The qualified 10B naphthenic type rubber filling oil is developed by taking hydrodeacidifying oil from Liaohe naphthene base vacuum cut 2 as raw oil.
经过实验室研究 ,以辽河环烷基减二线加氢脱酸油为原料 ,生产出合格的 10B高级环烷型橡胶填充油 ,产品通过了岳阳石化橡胶厂使用评定 ,10B高级环烷型橡胶填充油可以作为填充油生产SBS充油胶。
6) rubber extender oil
橡胶填充油
1.
The chromaticity, miscibility and anti-yellowing of SBS rubber extender oil produced by these technologies, which raw material was naphthenic-base or medium-base crude oil, could reach quality standard of the same overseas product and satisfy domestic market requiremen.
针对苯乙烯-丁二烯-苯乙烯嵌段共聚物(SBS)合成橡胶填充油质量要求与国内原油特点,开发了中压加氢处理、两段法高压加氢、全氢型流程与加氢精制等技术,并进行了工业应用。
2.
it can be used as active additives in vacuum distillation unit and solvent deasphalting unit, rubber extender oil and process softening agent in rubber industry,thermal conducting oil and printing ink solvent.
炼油厂重质芳烃油有多种化工用途,可作为蒸馏工艺强化剂、优化溶剂脱沥青工艺添加剂、橡胶工业的橡胶填充油和工艺软化油、工业导热油、黑色油墨溶剂油等。
补充资料：填充
分子式：
CAS号：
性质：制革的一个工序，常与加油在一起进行。重革的填充是在加油同时加入填充物料(如硫酸镁、葡萄糖等)，被革吸收后可以增加革的重量，改善丰满性和厚实感，并使革具有保持一定水分的性能。轻革的填充可在乳液加油后同浴进行，使用的填充剂有植物鞣剂及树脂填充材料等，有助于改善革的丰满和柔韧性及减轻松面缺陷。
CAS号：
性质：制革的一个工序，常与加油在一起进行。重革的填充是在加油同时加入填充物料(如硫酸镁、葡萄糖等)，被革吸收后可以增加革的重量，改善丰满性和厚实感，并使革具有保持一定水分的性能。轻革的填充可在乳液加油后同浴进行，使用的填充剂有植物鞣剂及树脂填充材料等，有助于改善革的丰满和柔韧性及减轻松面缺陷。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条