1) Linear modulated signal
线性调制信号
2) Linear frequency modulated signal
线性调频信号
1.
Analysis of clock shaking error in ADC based on linear frequency modulated signal;
基于线性调频信号的ADC时钟抖动误差分析
2.
A modified algorithm for the estimation of the parameters of linear frequency modulated signal;
一种修正的线性调频信号参数估计算法
3.
Parameter Estimation of Linear Frequency Modulated Signals Based on MP Algorithm;
基于MP算法的线性调频信号参数估计
3) LFM signal
线性调频信号
1.
Design of real-time parameter estimation system for LFM signal;
一种线性调频信号参数估计实时系统的设计
2.
Adaptive kernel distributions for multi-component LFM signals;
用于多分量线性调频信号的自适应核分布
3.
LFM signal will likely become the main signal form in underwater target strength broadband test.
线性调频信号可能将成为水下目标强度宽带测试的一种主要信号形式。
4) linear frequency modulation signal
线性调频信号
1.
A model of anti - reverberation welter with linear frequency modulation signal;
线性调频信号的抗混响起伏模型
2.
This method has used the short-time Fourier transformation basic principle,and analyzes some non-steady signals such as the linear frequency modulation signal,and the method can describe how the signal frequency changes along with the time well,then can distinguish the signal very easily.
此方法利用了短时傅里叶变换(STFT)的基本原理,对线性调频信号等一些非平稳信号进行分析,能很好地描述信号的频率如何随时间而变化,进而能很好把信号区分开来。
3.
A chirp parameters estimation method was proposed which could evaluate the Doppler frequency and chirp rate separately of the linear frequency modulation signals by comparing the mainlobe and sidelobe magnitude ratio of the rows or columns in the MDCFT amplitude matrix.
提出了一种从比较MDCFT幅度值矩阵行(列)的峰值旁瓣比来分别定位线性调频信号的多普勒中心频率和调频率的方法。
5) NLFM signal
非线性调频信号
1.
First of all,this paper compares some typical methods of extracting the in-pulse features of NLFM signal,such as wavelet transformation,PWD.
通过讨论小波变换法、伪威格纳威尔分布(PWD)法等典型非线性调频信号脉内特征提取方法,提出了将小波变换法和PWD法提取的结果进行截断综合,再提取时频图脊线的新算法。
2.
The basic principles of weight Linear Frequency-Modulated (LFM) signals and NLFM signals are introduced.
在研究线性调频信号加权和非线性调频信号产生原理的基础上,针对大时宽带宽积信号,基于4种窗函数对2种调频信号形式进行了波形设计,并进行了仿真,给出了不同设计波形的脉压性能,其结果对于大时宽带宽积信号的波形选择具有指导意义。
3.
The principium of NLFM Signal generation is expounded, and then the influence of Doppler-toler-ance of the signal, quantization digits and sampling frequencies on the digital pulse compression is analysed, by designing the waveform of NLFM signal on the basis of the fourth power of cosine window function.
阐述了非线性调频信号产生的基本原理,并基于余弦四次方窗进行了非线性调频信号波形设计,分析了该非线性调频信号的多普勒容限及量化位数和采样频率对数字脉压的影响,仿真结果表明该非线性调频信号具有一定的优越性,并对其数字脉压的工程实现有一定指导意义。
6) NLFM
非线性调频信号
1.
Design of NLFM Signal Based on Window Functions and Analysis of Its Performance;
基于窗函数的非线性调频信号的设计和性能分析
补充资料：调频-调频遥测系统
采用调频-调频二重调制方式的频分制遥测系统,简称FM-FM遥测系统，属于模拟式遥测系统。FM-FM遥测系统的抗干扰能力强，遥测精度也比较容易得到保证。模拟式遥测系统大都采用这一类系统。下图为 FM-FM遥测系统的框图。各路被测量经变换器变换成电压信号后去控制各路副载波振荡器。副载波振荡器一般采用压控振荡器（即电压控制的振荡器），其振荡频率正比于控制电压,这样就实现了第一次调频。为了防止路际干扰,各路已调副载波先通过低通滤波器，滤去高次谐波，再送到相加放大器形成多路信号，并通过信道调制器对载波调频，这样就实现了第二次调频。已调频的载波由发射天线发送出去。接收端收到遥测信号后先通过解调器解调出多路信号，再送往各分路的带通滤波器，即分路滤波器，把各路已调副载波分离开来。分离出来的已调副载波送到相应的分路解调器，进行第二次解调，就可以得到所传送的模拟信号。美国对 FM-FM遥测系统已经实现了标准化、模块化、系列化。广泛应用模拟集成电路制成标准部件，提高了系统的可靠性和适应性。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条