1) cracking intensity
裂化强度
2) fracture strength
断裂强度
1.
Fracture strengths of domestic ceramic orthodontic brackets during mesial-distal archwire tipping;
国产陶瓷托槽在近远中倾斜力下断裂强度的实验研究
2.
Fracture strength of domestic ceramic orthodontic brackets during archwire torsion;
国产陶瓷托槽在转矩力作用下断裂强度的研究
3.
Force controlling method for measuring fracture strength and toughness of diamond film;
测定金刚石膜断裂强度及断裂韧性的力控制法研究
3) breaking tenacity
断裂强度
1.
Influence of polypropylene tow fiber on hardness, weight, circumference, sucking resistant index of filter stick and finished filter stick rate was discussed under different breaking tenacity and breaking elongation.
本文介绍了烟用聚丙烯丝束在不同断裂强度、断裂伸长的情况下 ,丝束对其成棒后滤棒之硬度、重量、圆周、吸阻指标及成棒率的影
4) tearing strength
撕裂强度
1.
Study on the relation between nonuniform structure and tearing strength of PP geotextiles;
丙纶长丝土工布结构不匀与撕裂强度关系的研究
2.
The standard methods for measuring tensile strength and tearing strength,which are important parameters for leather,was introduced in this paper,and the influence of different raw skins on tensile strength and tearing strength for different leather was also discussed.
成革抗张强度和撕裂强度是表明成革质量好坏的重要指标。
3.
Effects on yield strength and elongation ratio, rupture strength and elongation ratio and tearing strength were studied.
对屈服强度及伸长率、断裂强度及伸长率以及撕裂强度等力学性能的研究发现 :在相同长径比及其分布情况下 ,与传统混合法则不同的是屈服强度和伸长率不相等 ,也不是只取决于短纤维的直径 ,而是受直径和长度的共同作用 ;在相同的纤维体积分数时 ,复合材料的断裂强度基本相同 ,而断裂形变和撕裂强度随纤维直径的减小而增
5) spall strength
层裂强度
1.
Temperature dependence of dynamic yield strength and spall strength for LY12 aluminum alloy under shock loading;
冲击加载下LY12铝合金的动态屈服强度和层裂强度与温度的相关性
2.
Influence of pre-stress on spall strength of LY12 aluminum
预应力对LY12铝层裂强度的影响
3.
According to the curve,the spall strength,the thickness of spall scab and the tensile strain rate under different condition were obtained.
根据所得曲线波形计算出相应条件下的层裂强度、层裂片厚度以及各自的应变率,最后得到层裂强度随拉伸应变率变化的关系曲线。
6) tear strength
撕裂强度
1.
Formulating of recipe for increasing tear strength of low hardness silicone rubber;
提高低硬度硅橡胶撕裂强度的配方设计
2.
The test of the water sorption, the water solubility and the tear strength of SY-1 and MDX4-4210 silicon rubber;
SY-1及MDX4-4210硅橡胶吸水率溶解率撕裂强度的对比测定
3.
In this paper,we will take tear strength for example to discuss this correlation.
物理性能参数间存在着相互关系,该文将以撕裂强度为例对其进行探讨。
补充资料：断裂强度(breakingstress)
【断裂强度】(breakingstress)将长方形高聚物样品夹于拉力机上以均匀速度拉伸至样品断裂时所须的应力。其值和断裂前的形变受到多种因素的影响。如在高聚物玻璃化温度以下很多度，形变很小时，应力即迅速上升，引起脆性断裂；温度稍为升高时，分子链段在大应力作用下，微有移动，断裂时主要仍是脆性的，但略带韧性；当温度接近玻璃化温度，链段在应力不太大时，能移动，产生强迫高弹形变。此时无定形高聚物链段有取向，有时可能部分结晶，在样品中部出现细颈，断裂
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条