1) wet adhesion strength
湿粘着力
2) Wet adhesion
湿附着力
1.
Progress and unsolved problems in the last decade ,which were concerned with three aspects: blistering, wet adhesion,permeation behavior of corrosive ions through coatings,were reviewed.
回顾近十年关于涂层起泡、湿附着力和腐蚀性离子在涂层中的传输行为 3方面所取得的进展和尚未解决的问题 ,提出了解决方
2.
The CPVCs of TiO2 and the others were ascertained by analyzing the factors which affected the hiding power and combining the mensuration of the wet adhesion.
对影响遮盖力因素进行分析,结合湿附着力测定,确定了TiO2等颜填料的CPVC量,分析了TiO2、滑石粉、立德粉等颜料的反射性能,并结合实验验证了反射隔热的综合效果,比较了含几种常用填料涂层的透射性能。
3) adhesion
[英][əd'hi:ʒn] [美][əd'hiʒən]
粘着力
1.
The contact mechanics model is established and the relation of the adhesion to the normal forces is simulated.
以JKR接触理论和GW粗糙表面模型为基础,将聚氨酯表面与光滑蓝宝石球的接触作为点接触,与玻片的接触看做是多个凸峰与光滑平面的接触,建立接触力学模型分析粘着力与法向力间的关系。
2.
When the ratio of polyol and diphenylem-thanediisocyanate is 1:2, the adhesion between rough surface and samples reaches its maximum.
结果表明,聚氨酯的化学成分对其粘着性能有重要影响,在多羟基化合物与MDI(二异氰酸酯)的组分比为1:2时,粘着力最大。
3.
For the special robot's foot design based on imitating the gecko's foot, the characteristics of adhesion and friction of 4 samples of polyurethane were tested.
结果表明,负法向力(即粘着力)随法向力的增加而呈对数规律增加;在负法向力下,切向力随负法向力的增加而线性增加;在一定负法向力下,切向力随初始法向力的增加按对数规律增加。
4) Adhesive Force
粘着力
1.
A formula of active earth pressure on retaining wall was proposed which considers the cohesion force on sliding plane and the adhesive force on interface of soil and retaining wall.
考虑滑裂面上填土的粘聚力及填土与墙背接触面上的粘着力,推得了粘性填土挡墙上的主动土压力计算公式。
2.
Based on the numerical method for the contact of wheel and rail with a water medium, a numerical method of analyzing the adhesive force between high speed wheel and rail with a water medium is developed under the condition of neglecting the part of traction forces transferred by the water medium.
借助于水介质作用下轮轨接触的数值解法 ,在忽略了由水介质传递的轮轨牵引力的条件下 ,建立了高速轮轨水介质粘着力的数值分析方法。
3.
in this paper, the generating principle of the tractive force and the brake power as well as their relationship to the adhesive force are analysed based on the mechanics theory.
本文根据力学原理分析了牵引力和制动力产生的机理，以及两者与粘着力的关系，得出牵引力和制动力的相同与不同之处，并提出应试验研究“计算最大制动力的粘着系数计算公式”。
5) adhesion force
粘着力
1.
The causes to dropping of the adhesion force at high speed are analyzed.
分析了高速时粘着力下降的原因 ,介绍了国外高速车辆改善粘着、提高粘着力的方法 ,提出我国高速车辆应采取的相应措
2.
The main feature of the model is the incorporation of the particle adhesion force and the large deformation of the particle and pad.
基于芯片/磨粒/抛光垫的微观接触力平衡关系,建立了考虑抛光垫/磨粒大变形和粘着力效应的微观接触模型。
6) binding power
粘着力
1.
The binding power and exposure degree are used in the incipient velocity formula of rill sediments.
引入暴露度概念 ,考虑粘着力对泥沙起动的作用 ,用建立的细沟流泥沙起动公式推导出细沟侵蚀稳定宽度的计算公式 。
2.
According to the movement characteristics of sediment,the binding power and exposure degree were used in the incipient velocity formula of rill sediment.
根据细沟泥沙运动特点,考虑细颗粒泥沙的粘着力作用和非均匀沙的暴露度,建立了细沟泥沙起动公式。
补充资料：附着力
分子式：
CAS号：
性质：是指漆膜与被涂物表面结合在一起的坚牢程度而言的。这种结合力是由漆膜中聚合物的极性基团(如羟基或羧基)与被涂物表面的极性基相互作用而形成的。被涂物表面有污染或水分；漆膜本身有较大的收缩应力；聚合物在固化过程中相互交联而使极性基的数量减少等。这些均是导致漆膜附着力下降的因素。漆膜的附着力只能以间接的手段来测定。目前专门测定漆膜附着力的方法分为两大类型，即以划格法、划圈法为代表的综合测定法，和以拉开法为代表的剥落试验法。
CAS号：
性质：是指漆膜与被涂物表面结合在一起的坚牢程度而言的。这种结合力是由漆膜中聚合物的极性基团(如羟基或羧基)与被涂物表面的极性基相互作用而形成的。被涂物表面有污染或水分；漆膜本身有较大的收缩应力；聚合物在固化过程中相互交联而使极性基的数量减少等。这些均是导致漆膜附着力下降的因素。漆膜的附着力只能以间接的手段来测定。目前专门测定漆膜附着力的方法分为两大类型，即以划格法、划圈法为代表的综合测定法，和以拉开法为代表的剥落试验法。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条