1) custom-made earmould
度耳订制的耳模
2) teeth circular shaping die
制牙圈耳模
3) Earmould
耳模
1.
Assessment to the Acoustic Effect of the Length of the Earmould and Tubing;
耳模和声管长短的声学效果评估
4) earring
[英]['ɪərɪŋ] [美]['ɪrɪŋ]
制耳
1.
Relationship between earring and textures in aluminum alloy determined by diffraction analyses;
铝合金中制耳与织构关系的衍射分析
2.
The earring of the deep-drawing aluminium sheet in the conditions of cold rolling and annealing system were investigated.
研究了冷轧及退火制度对1050深冲铝板材制耳的影响。
3.
Intermediate annealing is applied to reduce 45 ° earrings in the final aluminum alloy 1050 sheets by enhancing cube texture.
针对工业1050铝合金产品中出现的45°制耳率过高的现象,利用X射线衍射及背散射电子衍射取向成像技术测定了不同中间退火工艺下制耳率与样品中R织构和立方织构的关系。
5) ear
[英][ɪə(r)] [美][ɪr]
制耳
1.
FCC sheet earring based on rate-independent polycrystalline plasticity FEM;
基于率无关晶体塑性模型的深冲制耳分析
2.
The influence of trace RE-Y on the deformation and annealing textures in high purity aluminum and the effect of some textures on the deep-drawing ears of aluminum sheet were studied.
结果表明:稀土元素钇的加入改变了铝板的形变织构组分及强度,在轧制过程中主要形成了旋转立方织构,冲压以后形成4个45°方位的制耳。
3.
FCC sheet earring based on rate-independent polycrystalline plasticity FEM;
在两种织构组分的相互制衡下,冲杯不具有明显的制耳现象。
6) earing
[英]['iəriŋ] [美]['ɪrɪŋ]
制耳
1.
?A new method is proposed to predict the earing behavior of polycrystalline Aluminum sheet.
应用Tucker单晶制耳理论,结合晶体学取向空间划分的方法,预测铝合金板材中各织构组分所引起的制耳倾向类型及相对大小·首先对{100}〈001〉和{110}〈112〉取向单晶的制耳进行模拟,发现与Tucker单晶制耳理论所得结果完全一致·再将该方法应用于无织构的板材、冷轧板材、退火板材及西南铝厂生产成品板材的制耳计算,结果与理论预期值符合较好·此计算方法可以快速有效地预测板材制耳发生的倾向,并可以用于深冲铝合金板材的织构调控·基于"工艺 织构 制耳"关系的研究,有助于建立合适的织构/性能快速预报系统
2.
The effects of the main processes on texture and earing of 3104 aluminum alloy sheet are investigated with the help of electron microscopy,X ray diffractometry and deep drawing.
采用金相显微镜 ,X -射线衍射技术和深冲试验等手段 ,研究了主要生产工艺因素对 310 4铝合金板材织构和制耳行为的影响。
3.
A new method was proposed to predict the earing behaviour of textured sheets.
提出一种根据板材晶体学织构预测深冲制耳行为的新方法，预测了立方金属板中重要织构组分的制耳倾向类型及相对大小。
补充资料：耳穴模型
耳穴模型
耳穴模型 针灸教具。是标示耳针穴位位置的模型。又称耳针模型。多用塑料、乳胶或石膏制成。供针灸教学和临床参考之用。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条