说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 洗液湍流
1)  liquor turbulence
洗液湍流
2)  solid-liquid turbulent flow
液固湍流
1.
According to the Lagrange Discrete Phase Model of multiphase flow, a numerical simulation has been conducted for isothermal, incompressible, steady state, solid-liquid turbulent flow through cone convergent nozzle with column section at outlet used in premixed abrasive water jet with FLUENT software.
基于多相流动的拉格朗日离散相模型,应用FLUENT软件对前混合磨料射流出口带圆柱段的圆锥收敛形喷嘴内部等温、不可压缩、稳态、液固湍流进行了数值模拟。
2.
Based on the Lagrange discrete phase model of multiphase flow,a numerical simulation was conducted for isothermal,incompressible,steady state,solid-liquid turbulent flow through straight pipe abrasive nozzle with collimated pipe hold still and cone convergent section at inlet used in collimated pipe abrasive water jet with FLUENT software.
基于多相流动的拉格朗日离散相模型,应用FLUENT软件对准直管磨料射流准直管静止不动、入口带圆锥收敛段的直管磨料喷头内部等温、不可压缩、稳态、液固湍流进行了数值模拟。
3)  turbulent blood flow
血液湍流
4)  liquor turbulence
液体湍流
5)  gas-liquid two-phase turbulence
气液两相湍流
6)  solid-liquid two-phase turbulent flow
固液两相湍流
1.
Simulation of solid-liquid two-phase turbulent flow in double-channel pump based on Mixture model;
基于Mixture多相流模型计算双流道泵全流道内固液两相湍流
2.
To study the flow characteristics of centrifugal rotor,solid-liquid two-phase turbulent flow in low-specific-speed centrifugal rotor is simulated by using Fluent software with mixture model,standard turbulence model and SIMPLEC algorithm.
为了分析离心叶轮内固液流动特性,采用M ixture多相流模型,扩展的标准κε湍流方程与SIMPLEC算法,应用流体动力学软件Fluent对低比转速离心泵叶轮内固液两相湍流进行了数值模拟。
补充资料:洗液
分子式:
分子量:
CAS号:

性质:用于洗涤容量分析的玻璃仪器,如容量瓶、移液管、滴定管等。常用的有铬酸洗液,配制方法如下:将5克重铬酸钾以少量水润湿,慢慢加入80毫升粗浓硫酸,边加边搅,可加热使之溶解。配好的溶液贮于具磨石塞的玻璃瓶中备用。洗涤时先用该洗液浸泡仪器,再用水冲洗干净。如洗液变绿即告失效。洗液具有强酸性和强氧化性,小心不要溅到皮肤和衣物上。此外还有适用于洗涤油腻及有机物的含高锰酸钾的氢氧化钠洗液,配制时把4克高锰酸钾溶于100毫升10%的氢氧化钠溶液即成。如果洗涤被有机试剂染色的器皿,可以用盐酸-酒精(1:2)洗液。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条