说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 醚浆;醚渣
1)  ethereal sludge
醚浆;醚渣
2)  Ether [英]['i:θə(r)]  [美]['iθɚ]
1.
Study on the QSAR of organic pollutants of alcohols and ethers;
醇、醚类有机污染物的QSAR研究
2.
~mG for research on structure-property relationships of ethers;
~mG用于醚结构/性质相关性研究
3.
A Theoretical Simulation of Hydroboration of Alkenes with BH_3 in Ether Media;
醚溶液中烯烃硼氢化反应机理的理论模拟
3)  Ethers
1.
A Study on the Oxidation of Ethers by PEG·NO_2;
PEG·NO_2对醚的氧化性能研究
2.
Solvent-free microwave irradiation assisted synthesis of ethers
无溶剂微波辅助合成醚类化合物的工艺探讨
3.
In this article the recent progress in studies on selective oxidation of ethers has been reviewed.
本文综述了近年来醚选择性氧化研究的新进展。
4)  ether A
醚A
1.
The emulsifiers of forming ethylicin microemulsion have been chosen through the experiment and they are calcium salt B,ether A and assistant surfactant n-butanol.
通过实验筛选出了用于配制乙草胺微乳液的乳化剂品种钙盐B、醚A及助表面活性剂正丁醇,并得出了它们的最佳配比关系∶m(醚A)∶m(钙盐B)∶m(正丁醇)=4∶1∶3。
5)  PEEK [英][pi:k]  [美][pik]
聚醚醚酮
1.
Synthesis and characterization of PEEK;
工程塑料聚醚醚酮的合成与表征
2.
Tribological behavior of PEEK composites filled with various surface modified whiskers;
晶须表面改性及其填充聚醚醚酮摩擦学行为
6)  polyetheretherketone
聚醚醚酮
1.
Polyetheretherketone (PEEK) is a super thermal engineering plastic material which has significant performances , particularly in respects of fracture toughness, damage tolerance and resistance to hot, and wet environments.
聚醚醚酮树脂在复合材料中呈现典型的球状结构,这种晶体结构发生在树脂相或纤维表面,导致聚醚醚酮基体和碳纤维之间存在良好的界面结合力。
2.
The basic physical and chemical properties of polyetheretherketone(PEEK) composites are presented and the research progresses on tribological behaviors of particle filled,fiber reinforced and plasma treaded PEEK composites are reviewed.
介绍聚醚醚酮(PEEK)的基本物理化学性能,评述粒子填充、纤维增强、有机-无机共混和等离子处理PEEK复合材料的摩擦磨损性能研究进展,指出今后应加强对多因素协同作用下PEEK复合材料磨损机理、开展PEEK复合材料微观摩擦学及生物摩擦学方面的研究。
3.
The friction and wear behavior of polyetheretherketone(PEEK) composites reinforced with carbon fibers was investigated on the abrasion tester under dry sliding against 45* steel disc at room temperature.
用磨损试验机对碳纤维增强聚醚醚酮(PEEK)复合材料进行室温干滑动磨损试验,考察了碳纤维的含量、石墨润滑剂、对磨时间及载荷对材料磨损量及摩擦系数的影响,并用电子显微镜对其磨损表面进行了观察与分析,同时对材料的磨损机理进行了探讨。
补充资料:

ether
    通式为R-O-R′的一类化合物 。在醚的结构中,氧原子与两个烃基相连,烃基可以相同,也可不相同,相同的称为简单醚,不相同的称为混合醚。烃基可为芳烃基或脂肪烃基。两个烃基可以彼此相连,形成环醚,如环氧乙烷。多个氧原子分别与碳原子相连而形成的环状醚称为大环醚或冠醚。链型分子中如果含有多个碳--碳(≡C-O-C≡)结构单元,则称为缩二醇醚,如缩二乙二醇二甲醚(CH3OCH2CH2)2O。
   一般醚以与氧相连的烃基加醚字命名,例如,C2H5-O-C2H5称二乙基醚,简称乙醚;CH3-O-C2H5称甲基乙基醚,简称甲乙醚。环醚一般用俗名。
    醚与烃类很相似,化学性质比较稳定,在常温下与强碱和碱金属不发生反应,与强酸可形成盐,如:!!!M0901_1此反应产物再进一步与氢卤酸作用,则生成卤代烃和醇,醇还可与氢卤酸反应生成卤代烃。醚在避光的情况下与氯或溴反应,可生成氯代醚或溴代醚。醚在光助催化下与空气中的氧作用,生成过氧化合物。
   在工业中,通常是在酸或氧化铝作用下由醇间失水制取。实验室中常用醇钠与卤代烷反应制取。多数醚是很好的溶剂,高沸点的醚可用作反应介质。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条