1) field weakening by tapping
磁场分接
2) field shunting contactor
磁场分路接触器
3) anti-connect field
磁场反接
1.
Through improvement,the method of anti-connect field to stop-motion of mine battery locomotive can be realized steadily.
煤矿蓄电池机车经过改造实现平稳的磁场反接制动是可行而有效的。
4) Magnetic field distribution
磁场分布
1.
Numerical analysis was made on magnetic field distribution in working area of magnetic abrasive finishing by the finite difference method,and a kind of arithmetic to calculate the isodynamic was put forward.
利用有限差分的方法对磁极开槽情况下磁力研磨加工区域中的磁场分布进行了数值分析,提出了一种等磁位线的计算绘制算法,得到了加工区域磁场分布的等磁位线图。
2.
Magnetic field distribution of the ECRH superconducting magnet on HL-2A tokamak has been measured,and the results show that the normalized axial magnetic induction is not less than 0.
测量了HL-2A装置ECRH超导磁体的磁场分布。
3.
The effects of structural parameters of target cathode on magnetic field distribution during magnetron sputtering were simulated and analyzed to design a new-type rectangularly plane cathode,then the magnetic field of the designed cathode was simulated and analysed.
文章模拟分析了结构参数对磁控溅射阴极磁场分布的影响,设计了一种新型的矩形平面磁控溅射阴极,并对设计的阴极磁场进行模拟分析,结果表明有效提高了靶材表面磁场分布的均匀性。
5) distribution of magnetic field
磁场分布
1.
A study of the distribution of magnetic field on the axis of spiral valave;
螺线管轴线上磁场分布的研究
2.
The distribution of magnetic field in electromagnetic soft-contact mold with different slit parameters was analyzed through 3-D FEM numerical simulation method.
结果表明,对于部分切缝结晶器,结晶器口部有无盖板对其内部磁场分布的影响不大;增加结晶器切缝数,结晶器内磁场的渗透率、磁感应强度、磁场的有效作用范围及磁场的均匀性都得到增强;切缝宽度对结晶器内部磁场的影响不大;切缝长度越长,磁感应强度越大,磁场的有效作用范围越大。
3.
The effect of shield sheet on distribution of magnetic field in soft contact mould has been studied experimentally.
研究了屏蔽片对软接触结晶器中磁场分布的影响，通过对磁场的测定和液态金属成形实验，找出了屏蔽片的不同尺寸对磁场分布影响的定量规律。
6) magnetic field analysis
磁场分析
1.
Design method and magnetic field analysis of axial-magnetized permanent magnet micromotor;
轴向磁化永磁微电机磁场分析及设计方法研究
2.
Application of ANSYS finite element analysis software to locomotive main alternator electromagnetic field analysis;
ANSYS有限元分析软件在机车主发电机电磁场分析中的应用
3.
Combining Preisach model and finite element analysis,a dynamic magnetic field analysis is implemented for a permanent magnet assembly in a process of assembling.
该方法将Preisach磁滞模型和有限元法相结合,完成对强磁场永磁机构装配过程的动态磁场分析。
补充资料：反接
1.反绑两手。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条