2) Nitriding
['naitraidiŋ]
氮化处理
1.
The characteristics and nitriding technology of the powder metallurgy materials used for huls in CA S5 20 transmission were investigated.
对CAS5 2 0传动器进行了粉末冶金 (PM )同步器齿毂材料和氮化处理工艺研究。
2.
Through analysis of properties of the moulds used in aluminium alloy forging products after nitriding process, the significance of moulds nitriding process in massive, medium or small type and high - precision aluminium alloy die forging products is discussed.
通过对生产铝合金模锻件所需模具经过氮化处理后的性能分析，阐述了模具氨化处理在大批量、中小型、高精度铝合金模锻件生产中的重要性。
3.
This article take the H13 compression casting mold as an example,from annealing 、quenching briefly introduced the tempering to the nitridingthe enhancement pressure casts a mold the life heat treatment craft.
本文以H13压铸模为例,从退火、淬火、回火到氮化处理,介绍了提高压铸模寿命的热处理工艺,并详细地分析了每一热处理工序目的及所应达到的温度指标。
3) softening
[英]['sɔfn] [美]['sɔfṇ]
软化处理
1.
To provide reference for further study on wood modification ,this paper summarizes the results of research on wood modification including color improvement, softening, size stab.
概述了我国木材科学界在木材颜色处理、软化处理、尺寸稳定化处理、强化处理以及阻燃处理等方面最近 10年的研究成果 ,并提出了发展方向 ,为木材改性的进一步研究提供参
4) softening treatment
软化处理
1.
Dynamic mechanical analysis (DMA) could be used to evaluate the effect of softening treatment with heat and water.
DMA研究表明:高温软化处理的竹材,其储能模量明显降低,在40℃时,经高温软化处理后竹材的储能模量比未软化处理后的竹材降低了60。
2.
In order to improve bamboo softening effect and effeciecy quickly,softening treatment technology at high temperature was adopted.
结果表明:竹材经密闭高温120℃软化30min后,其弹性模量大幅度下降,由未处理前的8912MPa下降到6417MPa,竹材经高温软化处理后塑性提高。
3.
Softening treatment process of bamboo is crucial.
重组竹加工工艺软化处理至关重要。
5) softening process
软化处理
1.
The results showed that the optimum softening process for the stalks was to boil them for 3 hours.
对棉秆的软化处理和棉秆重组材的生产工艺进行研究,结果表明:棉秆经热水常压蒸煮3 h,能够获得较好的软化效果;密度、施胶量和防水剂对棉秆重组材的性能影响较大。
2.
Internationally,a trend that deals with conflict rules in softening process has gradually formed,and China s legislation of international private law and the judicial practice also comply with this trend at present in order to compensate for the deficiency of legislation of conflict rules.
国际上逐渐形成了对冲突规范进行软化处理的潮流。
3.
In the field of private international law conflict rules softening process is an undisputed truth.
在国际私法领域对冲突规范进行软化处理已是不争的事实。
6) intenerating
[英][in'tenəreit] [美][ɪn'tɛnə,ret]
软化处理
1.
This paper introduces the developing progress of metallic pressure sealing ring,including selecting material,drawing special forging process,intenerating process and drawing machining process.
介绍了具有优良使用性能,可替代进口产品的金属自密封环的研制,包括选材、制定特殊锻造工艺、制定机械加工工艺规程和软化处理等。
补充资料：氮化硅晶须补强氮化铝陶瓷基复合材料
分子式：
CAS号：
性质：以氧化铝陶瓷为基体，氮化硅晶须为增强体的复合材料，是一种性能优异的耐高温结构陶瓷。加入氮化硅晶须，可使氧化铝陶瓷的强度、韧性、抗热震性等得到明显的改善。在氧化铝基体中，加入20%(质量)氮化铝晶须制得的复合材料基强度提高了约50%，断裂韧性KIC达到氧化铝基体的1.5倍。这种材料可用于机械受力及耐磨部件以及作为耐热、耐腐蚀部件。
CAS号：
性质：以氧化铝陶瓷为基体，氮化硅晶须为增强体的复合材料，是一种性能优异的耐高温结构陶瓷。加入氮化硅晶须，可使氧化铝陶瓷的强度、韧性、抗热震性等得到明显的改善。在氧化铝基体中，加入20%(质量)氮化铝晶须制得的复合材料基强度提高了约50%，断裂韧性KIC达到氧化铝基体的1.5倍。这种材料可用于机械受力及耐磨部件以及作为耐热、耐腐蚀部件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条