1) PETP ;polyethyleneterephthalate
聚乙醇对苯
2) Polyethylene glycol terephthalate/polyethylene glycol(PET/PEG)
聚对苯二甲酸乙二醇酯/聚乙二醇醚
3) Poly(ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
Poly(ethylene terephthalate)(PET)and PA5935 were blended in a high speed mixer,and then injected into specimense.
将聚对苯二甲酸乙二醇酯(PET)与PA5935高速共混,注射制样,样品的热性能、力学性能、阻燃性能和流变性能等测试结果表明,在PET中加入少量PA5935改善了PET抗熔滴性能与炭化性能,但结晶度、氧指数和部分力学性能下降。
2.
The immiscible poly(ethylene terephthalate)(PET)/polypropylene(PP)blend was prepared by melt mixing and its structural rheology was studied.
通过熔融共混制备了不相容的聚对苯二甲酸乙二醇酯(PET)/聚丙烯(PP)复合体系,研究了复合体系的结构流变学。
3.
The feasibility of in-situ microfibrillar method on recycling poly(ethylene terephthalate)(PET) and high-density polyethylene(HDPE) mixtures was carried out by four repetitive extrusion.
研究了原位微纤化方法在回收聚对苯二甲酸乙二醇酯(PET)和高密度聚乙烯(HDPE)混合物方面的应用。
4) PET
[英][pet] [美][pɛt]
聚对苯二甲酸乙二醇酯
1.
Interaction Parameters of the PET/PC and PET/Phenoxy Resin Blends;
聚对苯二甲酸乙二醇酯与聚碳酸酯及聚酚氧树脂间的相互作用参数
2.
Preparation of PET/MWNTs Nano Composite by Covalent Grafting;
多壁碳纳米管与聚对苯二甲酸乙二醇酯的接枝聚合
3.
The grafting product was used as the reactive compatibilizer of HDPE/PET blend and the influences of the compatibilizer on mechanical properties, thermostimulative shape memory function of blends were discussed.
结果表明:采用GMA/St双组分单体具有较高的接枝率,生成的接枝物对HDPE/聚对苯二甲酸乙二醇酯(PET)共混合金的增容效果较好;提高了体系的力学性能和热致形状记忆性能,且HDPE-g-(GMA-co-St)含量为5～10phr时,合金具有较好的综合性能。
5) Poly (ethylene terephthalate)
聚对苯二甲酸乙二醇酯
1.
The research on poly (ethylene terephthalate)/polycarbonate alloy was reviewed.
评述了近年来聚对苯二甲酸乙二醇酯(PET)/ 聚碳酸酯(PC)合金研究的最新工作,着重讨论了 PET/PC 合金酯交换与相容性的关系、第三组分增容 PET/PC、PET/PC 体系的结晶行为以及 PET/PC 合金的应用4个方面,并对 PET/PC 共混物的发展方向进行了展望。
6) poly(ethylene terephthalate)
聚对苯二甲酸乙二醇脂
补充资料：聚[亚氨基(1,2-二氧-1,2-二乙烯基)亚氨基-1,2-二乙烯基]
CAS：36812-63-2
分子式：(C4H6N2O2)x
中文名称：聚[亚氨基(1,2-二氧-1,2-二乙烯基)亚氨基-1,2-二乙烯基]
英文名称：Poly[imino(1,2-dioxo-1,2-ethanediyl)imino-1,2-ethanediyl]
分子式：(C4H6N2O2)x
中文名称：聚[亚氨基(1,2-二氧-1,2-二乙烯基)亚氨基-1,2-二乙烯基]
英文名称：Poly[imino(1,2-dioxo-1,2-ethanediyl)imino-1,2-ethanediyl]
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条