1) UV flexible printing ink
UV柔版油墨
2) UV flexo ink
UV柔印油墨
1.
The formulation of UV flexo ink was designed and 3 different photoinitiators were chosen to make the ink and the curing rate of ink was tested.
设计了UV柔印油墨的配方,选用了3种光引发剂制备油墨样品,测试了油墨样品的固化速度。
2.
In order to obtain UV flexo ink with good performance,on the premise of the unchanged pigment content,primary UV flexo magenta ink samples are prepared with different oligomers and pigment/binder ratios.
为了获得具备良好性能的UV柔印油墨,在颜料含量不变的前提下,采用不同种类的预聚物及颜基比,制备UV柔印品红油墨色浆,并改变预聚物、单体的种类,将色浆调稀配制油墨,考察预聚物、单体对UV柔印油墨性能的影响。
3) flexographic printing ink
柔性版油墨
4) water-based flexographic printing ink
柔性版水型油墨
5) water-based flexo-ink
水性柔性版油墨
1.
Experimental results indicate that the deinking efficiency of papers is followed the order of with oil-based inks, water-based UV-curable inks and water-based flexo-inks from high to low when conventional alkaline floatation deinking process is employed.
实验结果表明,在常规的碱法浮选脱墨工艺中,油基油墨的脱墨效果最好,水性光固化油墨次之,水性柔性版油墨脱除率最低;3种不同类型的脱墨剂中,BH脱墨剂的脱墨效果最好。
6) flexographic water-based ink
柔性版水基油墨
1.
The effect of shear stress,shear rate,the yield value,ink pigment,surfactants and temperature on ink viscosity was studied based on analysis of the rheological behavior of flexographic water-based ink in the process of transmission.
在分析柔性版印刷水墨在传输转移过程中的流变特性的基础上,研究了剪切应力、剪切速率、屈服值、油墨颜料粒子、表面活性剂以及温度等对柔性版水基油墨粘度的影响。
补充资料：[3-(aminosulfonyl)-4-chloro-N-(2.3-dihydro-2-methyl-1H-indol-1-yl)benzamide]
分子式：C16H16ClN3O3S
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
分子量：365.5
CAS号：26807-65-8
性质：暂无
制备方法：暂无
用途：用于轻、中度原发性高血压。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条