说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 内间隙比
1)  inside clearance ratio
内间隙比
2)  inside clearance ratio
取样器内间隙比
3)  clearance ratio
间隙比
1.
The vortex shedding frequency and the wall pressure fluctuations were measured with the aim of analying the effect of changing the clearance ratio shedding and the wall pressure fluctuations when the circular cylinder bed in the air turbulent boundary layer.
测量了尾涡脱落频率和平板表面压强脉动,目的是分析当圆柱嵌入空气湍流边界层的情况下,间隙比值对尾涡脱落频率及壁脉动压强的影响。
4)  gap ratio
间隙比
1.
Under two Reynolds numbers(1092,796) of momentum loss thickness with 12 gap ratios(ratio of the gap between a circular cylinder and a plane wall to the diameter of the circular cylinder)from 0 to 1.
分别在两个动量损失厚度雷诺数1092和796下,对两个不同直径的圆柱,取间隙比(圆柱与壁面间的距离与圆柱直径之比)0到1。
2.
The sand accumulation on the wall in flows around a near-wall circular cylinder has been mainly investigatee by the method of the numerical simulation at the sub-critical Reynolds number1200(based on the diameter of the circular cylinder) and different gap ratios(ratio of the gap between a circular cylinder and a plane wall to the diameter of the circular cylinder) 1.
应用标准kε-湍流模型和流函数-涡量法分析了不同间隙比(圆柱与壁面间的距离对圆柱直径之比)下的尾流特性,得到圆柱表面升阻力和平板壁面压强脉动。
3.
The vortex-excited force on the stationary cylinder with different gap ratios was studied.
对静止圆柱体在不同间隙比情况的激振力变化规律进行分析,发现间隙比为0。
5)  big clearance ratio
大间隙比
1.
For the hard disk drives, head air bearings are characterized by their big bearing numbers and big clearance ratios.
针对硬盘磁头气体轴承膜和轴承面问题,研究在大间隙比及大轴承数等条件下,求解可压缩气体雷诺方程时,对流系数和扩散系数对控制体积界面的影响。
6)  inside clearance
内侧间隙
补充资料:内间
1.诱使敌方的人做自己的间谍。 2.指自己内部产生的间谍。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条