1) Alsithermic reducing agent
铝硅热还原剂
2) alumino silico-thermic process
铝-硅热还原法
3) Al-Si reduction
铝-硅还原
4) aluminothermic reduction
铝热还原
1.
Effect of atmosphere on synthesis of titanium nitride in aluminothermic reduction process;
反应气氛对铝热还原氧化钛合成氮化钛的影响
2.
Using metal Al and TiO2 powders as starting materials TiN/Al2O3 composite ceramics were prepared by aluminothermic reduction of TiO2 in coke bed and a flowing nitrogen stream.
以金属铝粉和钛白粉为原料,在流动氮气和匣钵埋碳保护气氛下采用铝热还原氮化法制备了TiN/刚玉复合陶瓷。
3.
The result of thermodynamic calculation shows that the reduced products of V_2O_5 carbothermic reduction is the carbide of vanadium,the system of silicothermic reduction should add CaO,aluminothermic reduction can reach a reduc- tion rate of 99%,the reduction ability of Al is more effective than that of C and Si.
热力学计算结果表明,V_2O_5碳热还原产物是V的碳化物；硅热还原体系中需配加CaO；铝热还原可以得到99％的还原率,Al的还原能力比C和Si都要强。
5) aluminothermic deoxidization
铝热还原
1.
To the problems that residual oxygen content is high and deoxidizing difficult in the production process of high ferrotitanium by adopting aluminothermic deoxidization method,through observing the microstructures of oxygen element in high ferrotitanium by the numbers,the conformation of oxygen element in high ferrotitanium is determined.
针对用铝热还原法生产高钛铁中的O残留量高和难以脱除的问题,通过系统地观察O在高钛铁中的微观组织结构,确定了O在高钛铁中的存在形态。
2.
To the problems that residual oxygen content is high and deoxidizing difficult in the production process of high ferrotitanium by adopting aluminothermic deoxidization method,through observing the microstructures of oxygen element in high ferrotitanium by the numbers,the conformation of oxygen element in high ferrotitaaium is determined.
针对用铝热还原法生产高钛铁中的 O 残留量高和难以脱除的问题,通过系统地观察 O 在高钛铁中的微观组织结构,确定了 O 在高钛铁中的存在形态。
6) silicothermic reduction
硅热还原
1.
The result of thermodynamic calculation shows that the reduced products of V_2O_5 carbothermic reduction is the carbide of vanadium,the system of silicothermic reduction should add CaO,aluminothermic reduction can reach a reduc- tion rate of 99%,the reduction ability of Al is more effective than that of C and Si.
热力学计算结果表明,V_2O_5碳热还原产物是V的碳化物；硅热还原体系中需配加CaO；铝热还原可以得到99％的还原率,Al的还原能力比C和Si都要强。
补充资料：金属铝还原法
分子式：
CAS号：
性质： 是二氧化钛颜料中TiO2含量的一种测定方法，其原理是先用浓硫酸和硫酸铵将二氧化钛试样溶解，在二氧化碳气氛下用金属铝将四价钛还原为三价钛。还原后的溶液以硫氰酸铵作指示剂，用硫酸铁铵标准滴定溶液进行滴定测定之。该方法详见GB1706-93标准。
CAS号：
性质： 是二氧化钛颜料中TiO2含量的一种测定方法，其原理是先用浓硫酸和硫酸铵将二氧化钛试样溶解，在二氧化碳气氛下用金属铝将四价钛还原为三价钛。还原后的溶液以硫氰酸铵作指示剂，用硫酸铁铵标准滴定溶液进行滴定测定之。该方法详见GB1706-93标准。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条