1) urethane potting resin
![点击朗读](/dictall/images/read.gif)
聚氨酯封装料
2) polyurethane pouring sealant
![点击朗读](/dictall/images/read.gif)
聚氨酯灌封料
1.
High performance polyurethane pouring sealant was prepared with polytetramethylene glycol(PTMG),totylene diisocyanate(TDI) and methylene bis ortho chloroaniline(MOCA) solution,and the effects of the equivalent ratio n (—NH 2)/ n (—NCO), w (—NCO),finished cure time and relative humidity on the mechanical and electric properties were investigated.
以聚四甲撑醚二醇、甲苯二异氰酸酯和MOCA 溶液为原料,采用半预聚体法合成了高性能聚氨酯灌封料。
3) polyurethane potting material
![点击朗读](/dictall/images/read.gif)
聚氨酯的应用灌封材料
4) blocked polyurethane
![点击朗读](/dictall/images/read.gif)
封闭聚氨酯
1.
Cationic crosslinking blocked polyurethane(BPU)/ PAE sequential interpenetrating polymer networks (BPU/PAE IPNs) were prepared by the reaction of polyaminamide and epihalohydrin in the medium of cationic crosslinking blocked polyurethane.
以对羟基苯甲酸甲酯(MPHB)封闭的阳离子交联聚氨酯为反应介质,聚酰胺多胺和环氧氯丙烷进行反应制备出阳离子封闭聚氨酯(BPU)/聚酰胺多胺环氧氯丙烷(PAE)顺序互穿聚合物网络(BPU/PAE)。
2.
Imidazole blocked polyurethane/PAE composite paper strengthening agents were prepared through the reaction of polyaminamide and epichlorohydrin in imidazole blocked polyurethane(BPU) N-methyl pyrrolidone solution.
以咪唑为封闭剂制备出含羧基封闭聚氨酯(BPU),聚酰胺多胺与环氧氯丙烷在封闭聚氨酯中反应得到封闭聚氨酯/聚酰胺多胺环氧氯丙烷复合体纸张增强剂。
3.
Anionic imidazole-blocked polyurethane(ABPU) was prepared by the reaction of HDI,DMPA,bisphnol A,polyesterglycol and imidazole as blocking agent.
以咪唑为封闭剂,HDI、DMPA、双酚A、聚酯二醇为原料,制备出阴离子封闭聚氨酯(ABPU)。
5) polyurethane paint
![点击朗读](/dictall/images/read.gif)
聚氨酯涂料
1.
The feasibility study of direct application of rosin in the hydroxyl component of polyurethane paint is conducted.
研究了把松香直接并入NCO/OH型双组分聚氨酯涂料的羟基组分中的技术可行性,探讨了配方设计、助剂应用及漆膜固化机制。
2.
The high-solid acrylate-modified polyurethane paint is prepared with high-solid high-hydroxyl low-viscosity hydroxyl acrylate resin and synthetic fatty acid resin as main raw materials.
以高固高羟低黏的羟基丙烯酸树脂和合成脂肪酸树脂为主要原料制备高固体分丙烯酸改性聚氨酯涂料,讨论了树脂、固化剂、助剂和有机溶剂等对涂料性能的影响,制得的涂料综合性能良好,具有较好的环保意义。
6) PU coatings
![点击朗读](/dictall/images/read.gif)
聚氨酯涂料
1.
Study on flame-retardant modification of PU coatings by brominated epoxy;
![点击朗读](/dictall/images/read.gif)
溴化环氧对聚氨酯涂料的阻燃改性研究
2.
Thought and practice about the multiple film-forming mechanisms in PU coatings
![点击朗读](/dictall/images/read.gif)
聚氨酯涂料多重成膜机制的思考与实践
3.
The mechanical property of the film reached up to that of two-components solvent based PU coatings,and the coatings possessed excellent anti-corrosive property.
所得漆膜的机械性能达到溶剂型双组分聚氨酯涂料的性能,并具有优异的防腐蚀性。
补充资料:电力电容器灌封料
分子式:
CAS号:
性质:树脂(A)为聚醚填充料等,固化剂(B)为改性异氰酸酯等。由聚醚与辅助材料经脱水精制后再加填充料和催化剂进行反应,然后经研磨混合、过滤而成。树脂为白色或黄色黏液。密度1.35~1.40g/cm3。黏度(25℃)7000mPa·s左右。固化剂为黑色或黄色黏液。密度1.10~1.15g/cm3,黏度(25℃)5500mPa·s左右。用于电容器元件特别适用于电力电容器的表面密封和固定。
CAS号:
性质:树脂(A)为聚醚填充料等,固化剂(B)为改性异氰酸酯等。由聚醚与辅助材料经脱水精制后再加填充料和催化剂进行反应,然后经研磨混合、过滤而成。树脂为白色或黄色黏液。密度1.35~1.40g/cm3。黏度(25℃)7000mPa·s左右。固化剂为黑色或黄色黏液。密度1.10~1.15g/cm3,黏度(25℃)5500mPa·s左右。用于电容器元件特别适用于电力电容器的表面密封和固定。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条