1) Break-Make Ratio
断续比,通断比
2) on-off ratio
通断比
1.
For this reason,an artificial intelligent-fuzzy control algorithm is presented to realize automatic control of stove temperature through adjustment of on-off ratio of electrothermal element in quench stove.
针对大型立式淬火炉热惯性大、时间滞后明显、耦合强、难于建立精确数学模型的特点 ,本文提出了一种人工智能模糊控制算法 ,通过对淬火炉电热元件通断比的调节 ,实现对炉温的自动控制。
3) Pulse break/make ratio
脉冲断续比
4) make and break,on-off
通断;合断;断续
5) intermittence flow
断续流通
6) breaking work
断裂比功
1.
The experimental results showed that the breaking strength decreased logarithmically with the increase of clamp distance at constant drawing rate; and the average breaking strength, elongation at break and breaking work all increased with the increase of drawing rate at the same clamp distance.
在相同夹持距离下 ,随着拉伸速率的提高 ,平均断裂强力提高 ,断裂伸长增大 ,断裂比功也增大。
2.
The results showed the loss rates of stress,initial modulus and breaking work were more than 44%,65% and 51% after hydrothermal aging test respectively;but the corresponding parameters were less than 31%,27% and 36% after thermal aging test respectively.
结果表明,在热湿条件下老化结束后,材料的断裂应力、初始模量和断裂比功的损失率分别大于44%、65%和51%;而在热条件下老化结束后,材料对应指标的损失率分别小于31%、27%和36%。
补充资料：断续
断续
断续 病名。出《备急千金要方》卷二。即断绪。详该条。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条