1) patch cord
插线
2) Linear interpolation
直线插补
1.
Algorithm for linear interpolation of four coordinates with point-by-point comparison method;
基于逐点比较法的四坐标联动直线插补算法
2.
Linear interpolation control and its realization based on PLC;
基于PLC的直线插补控制及其实现
3.
Design and Realization of Linear Interpolation Controller Based on CPLD
基于CPLD的直线插补控制器的设计与实现
3) Line interpolation
直线插补
1.
A brief and fast new line interpolation arithmetic is proposed in this article.
文章介绍了一种简捷的快速直线插补新算法,两个坐标轴可实现同时进给,插补速度较快,均匀性好,偏差判别式的计算方法简单。
2.
This paper studies the algorithm improvement for the general method of line interpolation.
本文对传统的数控直线插补方法进行了算法改进 ,使插补过程中各坐标轴分配的脉冲序列保持均匀 ,以克服步进电机失步问题 ,提高了插补精
3.
To satisfy the high speed,high precision,high efficiency and high reliability of CNC system,a new line interpolation controller was designed in this paper.
为满足数控系统的高速度、高精度、高效率和高可靠性,设计了一种新型直线插补控制器。
4) linear interpolation
线性插补
1.
Meanings of linear interpolation and velocity;
多轴联动线性插补及其速度的理解
2.
This article analyzed the theoretical errors resulted from approximating the perfect continuous tool path with linear interpolation in 5-axis machining,and this kind of error is also called non-linear motion errors or known as the geometry-based errors.
分析了五坐标联动数控系统采用线性五轴插补运动时,与实际的空间非线性连续轨迹之间的理论加工误差;用空间解析几何、齐次坐标变换建立了双转台结构五坐标机床的运动变换数学模型,并结合五坐标数控机床加工过程的线性插补原理,建立了该类五坐标机床的非线性运动误差估计模型,提出了一种非线性误差控制策略。
3.
To overcome this problem and optimize machining speed,based on the data sampling method,the 5-axis simultaneous linear interpolation was realized by using the equivalent displacement and the directional coefficient of the coordinate axis.
基于数据采样法,利用当量位移和坐标轴方向系数实现了5轴联动线性插补;利用直线加减速原理进行插补前加减速控制;对速度前瞻控制方法进行了深入探讨,实现了相邻程序段转接处速度优化、连续微小程序段速度计算、减速点提前预测及前瞻程序段数动态选择等。
5) linear interpolation
线性内插
1.
In view of some drawbacks in gray associative analysis method, this paper presents a linear interpolation method, which considerably improves the resolution.
针对当前灰关联评价法的不足 ,采用线性内插的方法进行了改进 ,提高了分辨率 ,在此基础上 ,以马颊河为例 ,对其 1 986～1 998年间的水环境监测数据进行了评价 ,得到了较为可靠且可比的结果。
2.
The paper investigate a structure of the digital down-converter(DDC) and put forward a design of numerical controlled oscillator with method of tabulation view and fraction ratio decimation filter with mixing linear interpolation algorithm and CIC filter,so that the DDC process could be implemented in software on general purpose DSP chip and afford greater flexibility.
论述了数字下变频器的结构,探讨了采用查表方法实现数字控制振荡器,利用线性内插方法结合级联积分梳妆滤波器实现分数比抽取滤波,从而达到降低数字下变频器复杂性的目的,使得数字下变频处理可以在通用数字信号处理芯片中用软件实现。
3.
In the context, qualified visual three-dimensional ICT pictures are achieved through multi-piece two-dimensional images accumulation by, combining with thresholding method and linear interpolation.
工业CT图像三维重建是近年来工业CT技术研究的热点之一,将二维断层图像数据直接堆垒起来,结合阈值分割、线性内插等方法,获得了直观性较好的三维工业CT图像。
6) curve interpolation
曲线插补
1.
The algorithm simplified the complicated calculation in the usual course of B_spline curve interpolation, expedited the interpolation of B_spline curve, and has very important value in the real_time interpolation.
该方法简化了通常B样条曲线插补过程中的繁琐计算 ,提高了B样条曲线的插补速度 ,在B样条曲线的实时插补中具有非常重要的实际意义。
2.
In order to achieve high speed and precision work,and on the basis of three times NURBS curve analyzing,NURBS curve interpolation algorithm principle is proposed.
为实现数控机床高速度高精度加工,在分析三次NURBS曲线原理的基础上,提出NURBS曲线插补算法原理。
3.
This paper introduces the use of NURBS(Non- Uniform Rational B- Spline) in CNC(Computerized Numerical Control)curve interpolation.
本文详细介绍数控系统的NURBS(Non-Uniform Rational B-Spline)曲线插补技术。
补充资料：直线内插法
分子式：
CAS号：
性质：发射光谱定性分析测量谱线波长的方法。将铁和试样并列在同一谱片上摄谱，用铁谱已知波长的两条谱线按内插法，测定它们之间的未知谱线波长。然后查阅谱线表，认定该谱线属何种元素。
CAS号：
性质：发射光谱定性分析测量谱线波长的方法。将铁和试样并列在同一谱片上摄谱，用铁谱已知波长的两条谱线按内插法，测定它们之间的未知谱线波长。然后查阅谱线表，认定该谱线属何种元素。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条