1) Operational Character
平衡运算放大器
2) Balance amplifier
平衡放大器
3) Operational amplifier
运算放大器
1.
Design of folded-cascode operational amplifier with 0.6μm CMOS process;
0.6μm CMOS工艺折叠共源共栅运算放大器设计
2.
The design of CMOS operational amplifier used for LSI;
LSI中的CMOS运算放大器的设计
3.
Study of method for off-line automatic-test of operational amplifier board in electromechnical computational device;
机电计算装置中运算放大器板离线自动检测方案研究
4) amplifier
[英]['æmplɪfaɪə(r)] [美]['æmplə'faɪɚ]
运算放大器
1.
Then,this paper detailed introduces the features of high-voltage/high-current operational amplifier OPA548,designes hardware circuits of controlling the PEMFC fan with OPA548.
然后,对高电压、大电流运算放大器OPA548进行了详细的介绍,设计了用OPA548控制PEMFC风机工作电压的硬件电路,最后,对使用OPA548时应注意的事项进行了讨论。
2.
This paper presents a two-stage,compact,power efficient 3V CMOS operational amplifier with rail-to-rail input and output ranges.
35μmCMOS工艺下设计了一种基于片上系统应用的低功耗、高增益恒跨导满幅运算放大器。
3.
Based on SOC application,a Rail-to-Rail CMOS operational amplifier core with constant transconductance is presented.
5μm DPDM CMOS工艺,设计了一种恒定跨导的Rail-to-Rail CMOS运算放大器。
5) operation amplifier
运算放大器
1.
<Abstrcat> This paper analyses operation accuracy that is influenced by the open input resistance of operation amplifier by means of superposition theorem.
本文应用叠加原理分析运算放大器的开环输入电阻对反相比例放大运算精度的影响。
2.
Through anolysis,This chapter prove that the application of operation amplifier in the mechanical equipment velocity regulation system;improve the whole system operformanee make it reach the static and trend fur- get and solve the exact control requirement.
通过分析论证运算放大器在机械设备调速系统中的使用,改善了整个系统中的性能;达到了静、动态的各项指标,解决了精确控制的要求。
3.
A high precision amplifier circuit which can be used in processing nearly μV signal is introduced, the demand to select an operation amplifier which has high open-loop gain and low drift is discussed, and the problems of temperature and noise influences to the high precision amplifier circuit are explored.
讨论了对高精密 ,低漂移的集成运算放大器的选择要求 ,探讨了温度和干扰对小信号精密放大电路的影响问题。
6) operational amplifiers
运算放大器
1.
Capacitance Loads of Operational Amplifiers and the Resolvent;
运算放大器容性负载问题及其解决方法
2.
Integral circuits and differential coefficient circuits are usually worked as regulating Spectrometer based on operational amplifiers circuits through feedback network with resistances And capacitances in auto-control system.
针对常规的运算放大器反向积分电路的算法,提出了一种基于运算放大器正向积分电路的算法,并通过数学上的推导说明了正向积分电路的工作原理,最后对推导的结论进行了仿真和验证。
3.
In this thesis, analysed and designed the architecture of the new type CMOS Rail-to-Rail operational amplifiers in detail, and successfully designed one of two stage compact CMOS Rail-to-Rail amplifier and the CMOS bandgap reference current source.
本次论文详尽地分析和研究了新型CMOS Rail-to-Rail运算放大器的结构,完成了两级压缩式CMOS Rail-to-Rail运算放大器和CMOS带隙参考电流源电路的设计。
补充资料:《网络分析和反馈放大器设计》
论述网络分析和反馈放大器设计的名著,H.W.博德著,1945年在美国出版。作者在本书中叙述并发展了网络的一般理论,首先提出在一个网络中任何元件的回归差F 等于该元件具有正常值时的网络行列式与该元件值为零时网络行列式之比,推导出回归比T和环路传输μβ的关系
F=1+T=1-μβ
详细推导了网络函数的实部和虚部之间的关系,并把这种关系应用于负反馈放大器的输入、输出和级间网络的设计上。
详细推导了网络函数的实部和虚部之间的关系,并把这种关系应用于负反馈放大器的输入、输出和级间网络的设计上。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条