2) top roll
上辊，顶辊
3) up and down rolling wheel
上、下辊轮
1.
It includes the up and down rolling wheel,thorny roller,groovy roller,reducing gears.
设计了一种金属孔板波纹填料用刺孔机,包括上、下辊轮,刺辊,槽辊,减速系统。
4) Sizing Roller
上浆辊
1.
Influences of Sizing Roller Material and Squeezing Roller Material on Sizing Quality;
上浆辊与压浆辊材质对浆纱质量的影响
5) charging roller
上料辊道
1.
Through reforming the charging roller and strengthening the exterior coordination, the delay time of waiting gas is decreased by 110h, the fuel consumption per ton of plate is decreased by 1.
通过改造上料辊道 ,加强外部协调 ,使待煤气停产时间减少了 110 h,吨板燃耗降低了 1。
6) upper pressuring roll
上压辊
1.
When the rope entered into the upper and lower limitedrolls to positioning proximately, then lower support roll and upper pressuring roll by dint of lower roll risingconnected with upper roll to make accuracy positioning; the measurement should be made while therope passing through the measuring roll.
首先,钢丝绳进入上下限位辊和左右限位辊,初步定位;下托辊和上压辊在高度方向上借助于下托辊托起和上压辊压合精确步定位;然后,小压辊和计量辊联合使用,钢丝绳在通过计量辊时进行计量,导出后,通过另一组下托辊和上托辊,最后进入卷取支架上的一套卷取装置。
补充资料：辊辊
1.犹混混。形容苟且混世。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条