1) wet rub resistance
湿耐磨性能
2) wear resistance
耐磨性能
1.
Investigations of wear resistance after Supersonic Particles Bombarding in Cr-Zr-Cu surface;
超音速颗粒轰击铬锆铜表面耐磨性能的研究
2.
Experimental study of wear resistance of nickel based WC composite coating prepared by flame spraying and remelting+;
火焰喷涂重熔Ni基WC复合涂层的耐磨性能试验研究
3.
Microstructure and wear resistance of laser clad TiC+Ti and TiC+NiCrBSi composite layers on Ti-6Al-4V alloy;
TC4钛合金激光熔覆TiC+M涂层组织和耐磨性能研究
3) abrasion resistance
耐磨性能
1.
Improving abrasion resistance of tread compound with zinc oxide whiscker;
氧化锌晶须改善轮胎胎面胶耐磨性能的研究
2.
The results show that the abrasion resistance and compressive property of PTFE/GF increase markedly after irradiating.
结果表明,经电子束辐射后,PTFE/GF的耐磨性能和压缩性能均显著提高。
4) wear-resistance
耐磨性能
1.
In order to improve wear-resistance of the sucker rod,20CrMo was used as material of experiment samples,alloy and graphite powders were used as material of the layer,an acetylene blowtorch of thermal spray apparatus was used to apply a wear-resistance layer to 20CrMo surface.
为提高抽油杆的表面耐磨性能,选用20CrMo作为试样材料,采用合金加石墨混合粉末作为涂层原材料,利用氧乙炔热喷涂装置,在20CrMo试样表面上制备出耐磨涂层。
2.
A wear-resistance microstructure.
结果表明:随着Fe含量增加,Al-Fe复合材料的孔隙率增高,抗拉强度先升后降,伸长率下降,硬度和耐磨性增高,对偶件的减摩性能下降;Al-10%Fe和Al-20%Fe的耐磨性能分别为QSn6。
3.
The effects of rare-earth oxide CeO2 on the microstructure and microhardness and wear-resistance and corrosion-resistance of Ni-based metal-ceramic coatings were investigated.
采用CO2横流激光器在45#钢基体表面熔覆添加不同含量的稀土氧化物CeO2的镍基TiC金属陶瓷复合层;对熔覆层进行了显微组织观察、显微硬度测量、耐磨性能和耐腐蚀性能测试。
5) wear-resisting property
耐磨性能
1.
Microstructure and wear-resisting property of TiC particle reinforced coatings claded by TIG welding with multiple layer;
多层氩弧熔敷含TiC颗粒增强涂层的微观组织及耐磨性能
2.
A comparative study on wear-resisting property of Polypropylene monofilaments for fishing gear;
聚丙烯单丝耐磨性能的比较研究
3.
The influence of the tempering temperature on hardness and wear-resisting property of hardfacing metal had been discussed.
研制出了氮碳合金化自保护硬面药芯焊丝,探讨了回火温度对氮碳合金化自保护硬面药芯焊丝堆焊层硬度和耐磨性能的影响。
6) wearability
[英][,wɛərə'biliti] [美][,wɛrə'bɪlətɪ]
耐磨性能
1.
The abrasive parts made of polyurethane for making ceramic powder possesses excellent wearability and long life which make no contamination, low noise and save energy.
用聚氨酯制造电子陶瓷粉料过程中的各种耐磨件，耐磨性能好，使用寿命长，不污染物料，节能降噪，使用方便，物美价廉。
2.
The high temperature wearability and the mechanism of wearing-resistance of carbon fiber reinforced SiC/phenolic aldehyde sintered alloy were studied and discussed.
对碳纤维增强ＳｉＣ／酚醛树脂烧结合金的高温耐磨性能及其耐磨机理进行了详细研究。
3.
It has the characteristics of light weight,good wet -proof behaviour and wearability,high usable frequency.
它具有重量轻、抗湿性能好、耐磨性能好、使用率高、便于施工和保证混凝土表面质量等特点。
补充资料：耐磨
1.经得起磨擦。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条