1)  oil absorbency
吸油性能;油墨吸收性能
2)  oil absorptiveness
吸油性能;油墨吸收性能
3)  oil-absorbing
吸油
1.
Studies an oil-absorbing and room-temperature quick-curing adhesive.
研究了一种具有吸油性能的并且在常温下能够迅速凝胶固化的胶粘剂。
4)  oil absorption
吸油
5)  oil suction
吸油
6)  oil absorbency
吸油率
1.
Influential factors on apparent density and oil absorbency of suspension resin;
影响悬浮树脂表观密度和吸油率的因素
2.
The effects of the raw material ingredient, the amount of the dispersing agent, and the amount of the initiator on oil absorbency and gel fraction were investigated, and the optim.
重点研究了原料配比、引发剂用量、交联剂用量对树脂吸油率、凝胶量等性能的影响及规律，从而确定了最佳的实验条件。
7)  oil sorbent
吸油材料
1.
Study on preparing ecotype oil sorbent material from wood fiber;
生态型木纤维吸油材料的制备与研究
2.
A new type woody fiber oil sorbent material was prepared by pyrolysis of Fir TMP,the relation between oil absorption ability of the pyrolyzed TMP and pyrolysis temperature and extractives contents were studied.
将杉木TMP进行热解,制备出了新型木质纤维吸油材料。
8)  Oil adsorption ratio
吸油率
1.
During the production process of porous starch, oil adsorption ratio was used as an index toevaluate the porous starch.
工艺研究中,首先确定以吸油率作为衡量淀粉成孔的指标。
9)  oil absorbent
吸油剂
1.
The NR oil absorption composites were prepared by using the stearic methacrylate-butyl acrylate-styrene(SMA-BA-St) copolymer as oil absorbent and NR grafted copolymer as compatibilizer,and its properties were investigated.
以甲基丙烯酸十八酯-丙烯酸丁酯-苯乙烯(SMA-BA-St)共聚物作吸油剂、NR接枝共聚物作相容剂制备NR吸油材料并对其性能进行研究。
10)  oil-absorption resin
吸油树脂
1.
The oil-absorption resins are prepared by suspension copolymerization of monomer butyl methacrylate and butyl acrylate,with N,N′-methylene bisacrylamide as crosslinking agent,benzoyl peroxide as initiator,polyvinyl alcohol as dispersing agent and water as disperal phase in this paper.
以甲基丙烯酸丁酯(BMA)和丙烯酸丁酯(BA)为单体、N,N′-亚甲基双丙烯酰胺为交联剂、过氧化苯甲酰为引发剂、聚乙烯醇为分散剂、水为分散介质,采用悬浮聚合法制备了自溶胀型的吸油树脂,并通过正交实验考察了交联剂、致孔剂对树脂吸油性能的影响。
2.
The results showed that oil-absorption resin had better oil absorption rate after melting agent extraction when adding melting porogenic agent,which approved the dependent of oil-absorption resin to pole structure of resin.
本研究采用悬浮聚合法制备了致孔性丙烯酸酯吸油树脂。
补充资料：低吸油量氧化铁黄
分子式：
CAS号：

性质：吸油量低于普通氧化铁黄的氧化铁黄，通常吸油量为30～35g/100g。采用机械处理氧化铁黄的针状粒子，或者控制生产过程形成高强度的球形针状聚集体，所形成的低吸油量氧化铁黄适合作成高浓度的水性色浆或油性色浆，并可克服针状氧化铁黄在涂层和流延塑料膜中易产生的丝纹。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条