1)  pebble mill
球磨(机)
2)  Ball mill
球磨机
1.
Collision energy and energy distribution of grinding media of tumbling ball mills;
球磨(机)的磨介碰撞能量及能量分布
2.
Intelligent oil-spraying lubrication system applied in ball mill;
智能喷油润滑系统在球磨(机)上的应用
3.
Type selection and matching of rolling bearings of ball mill;
球磨(机)滚动轴承的选型及配合
3)  ball crusher
球磨机
1.
Method on big bearing pad of ball crusher;
球磨(机)大轴瓦快速修复法
2.
Improvement of antiwear capacity for type of DTM ball crusher;
浅谈DTM型球磨(机)耐磨性能的改进
3.
Aiming at the existing problems for long time in grinding production that it is difficult to measure the load of ball crusher,the load measuring system of ball crusher based on FPGA and embedded soft core NIOS was designed,which could measure the load of ball crusher correctly.
针对磨矿生产中长期以来存在的球磨(机)负荷检测困难及难以准确检测的问题,设计了一套基于FPGA与嵌入式软核NIOS的球磨(机)负荷检测系统,实现了球磨(机)负荷的准确检测。
4)  non-ball mill
无球磨机
1.
The development mode of non-ball mill was put forward based on the green design idea and modern design means.
依据现代设计方法,基于绿色设计思想提出了无球磨(机)的开发模式。
5)  ball-mill
球磨机
1.
Through comparison of the work philosophy between ball-mill and roller-mill,it is concluded that the roller-mill has the advantages of energy saving,less amount of large particles and easier for capacity increase as compared with the ball-mill.
通过球磨(机)和棒磨机的工作原理比较,得出棒磨机具有比球磨(机)省电、煤浆大颗粒少、负荷容易提高等优点。
6)  Milling by miller
球磨机法
7)  ball grinder
球磨机
1.
Analysis of the gear shaft's crack of a ball grinder and it's repair;
球磨(机)齿轮轴的断裂分析及修复
2.
Analysis of noise radiation of ball grinder for thermal power plant;
火电厂球磨(机)筒体噪声辐射分析
3.
The adjustment process of lead powder ball grinder was introduced.
介绍铅粉球磨(机)的调试过程。
8)  ball mills
球磨机
1.
The Reliability Optimum Design of the Gear Transmission of Ball Mills Based on Kriging Model;
基于Kriging模型的球磨(机)齿轮传动可靠性优化设计
2.
4 × 7m ball mills areused to grind high grade cement and cement raw matesial and puts forward the relevantsolutions.
4×7m球磨(机)粉磨高标号水泥和水泥生料出现的一些问题进行初步分析,并提出相应措施加以解决。
3.
The ball mills are widely used in the thermal power plants,but most of them are running in the conservative conditions,with large power consumption and small contribution to the coal-milling system.
但大部分球磨(机)系统都运行在保守工况下,造成制粉单耗大,系统出力小。
9)  Ball mill CAI
球磨机CAI
10)  ball mill mechanism
球磨机理
1.
For the purpose to make clear the stirred ball mill, we should take the study of ball mill mechanism and it's structural parameter.
研究搅拌球磨(机)要从球磨(机)理和其结构参数进行研究。
补充资料：球磨
分子式：
分子量：
CAS号：

性质：又称球磨机。磨碎或研磨的一种常用设备。利用下落的研磨体（如钢球、鹅卵石等）的冲击作用以及研磨体与球磨内壁的研磨作用而将物料粉碎并混合。当球磨转动时，由于研磨体与球磨内壁之间的摩擦作用。将研磨体依旋转的方向带上后再落下。这样物料就连续不断地被粉碎。按照机体的形状可分圆筒球磨（见图）、锥形球磨和管磨（又称管磨机）三种。优点是：（1）可用于干磨或湿磨；（2）操作条件好，粉碎在密闭机内进行，没有尘灰飞扬；（3）运转可靠，研磨体便宜，且便于更换；（4）可间歇操作，也可连续操作；（5）粉碎易爆物料时，磨中可充入惰性气体以代替空气。缺点是：（1）体积庞大笨重；（2）运转时有强烈的振动和噪声，须有牢固的基础；（3）工作效率低，消耗能量较大；（4）研磨体与机体的摩擦损耗很大，并会沾污产品。广泛应用于坚硬物质料粉碎。

说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条