2) Hot Metal Charging
热装铁水
1.
Process Practice of High Hot Metal Charging Rate for an 100t Finger Shaft Arc Furnace at Anyang Steel;
安钢100t竖式电弧炉高热装铁水比的工艺实践
2.
According to Tianjin Pipe practice of charging hot metal to a modern electric arc furnace, it was known that the hot metal charging technology could increase the economic benefit and expand the EAF steel grads.
根据天津钢管电弧炉炼钢热装铁水的工艺实践指出:热装铁水技术不但可以提高经济效益,而且还能扩大电弧炉熔炼钢种范围;对传统电弧炉和利用化学能炼钢的氧气转炉的熔池形状进行比较可知,利用电能和化学能相结合的现代电弧炉熔池形状设计深度应介于传统电弧炉和氧气转炉之间;对热装铁水的成本变化和热装铁水效益全面比较,结合热装铁水带来的负面影响,综合确定了现代电弧炉采用热装铁水的比例;铁水热装最佳方式是从炉后侧开口兑入铁水;铁水温度≥1200℃;铁水中硅质量分数≤1。
3) heat-resisting cast iron
耐热铸铁
1.
8 heat-resisting cast iron production cement kiln refrigerator with the heat-resisting nodular cast iron to raise the yard lumber the working condition and the craft technology.
8耐热铸铁生产水泥窑冷却机扬料板的生产条件和工艺技术。
4) hot-charging process of molten iron
铁水热装
1.
A discussion on the hot-charging process of molten iron for CONSTEEL-EAF;
CONSTEEL电炉铁水热装工艺探讨
5) Hot Metal Charging
铁水热装
1.
Practice for Energy Saving of a 65 t Consteel Electric Arc Furnace by Hot Metal Charging at Shiheng Special Steel;
石横特钢65tConsteel电弧炉铁水热装的节能实践
2.
The development and application of hot metal charging on 50 t EAF special steel plant at Laiwu Iron and Steel Co.
对莱钢50 t电炉特钢流程研究与应用铁水热装工艺进行了较为系统的介绍,经过实践获得了最佳的热装铁水比。
3.
Based on theoretic deduce and summarizing of application experience, themost effective method for the electric arc furnace hot metal charging and oxygen jetprocess is presented, and it is suggested to be the production guide.
针对电弧炉铁水热装的生产,通过理论推断和实际操作经验的总结分析,归纳出电弧炉铁水热装用氧工艺的最行之有效的方案,用以指导生产。
6) heat-resisting nodular cast iron
耐热球铁
1.
8 heat-resisting cast iron production cement kiln refrigerator with the heat-resisting nodular cast iron to raise the yard lumber the working condition and the craft technology.
介绍用耐热球铁(RQTS i5)代替RTC r0。
补充资料：热铁地狱
【热铁地狱】
（界名）以热铁所造之地狱也。智度论十六曰：“热铁地狱，纵横百由旬，驱打驰走，足皆燋然。”
（界名）以热铁所造之地狱也。智度论十六曰：“热铁地狱，纵横百由旬，驱打驰走，足皆燋然。”
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条