1) isothermal transformation
等温变态
2) Isothermal state
等温态
3) isothermal deformation
等温变形
1.
Flow stress characteristics of isothermal deformation at high temperature for 7075 aluminum alloy;
7075铝合金高温等温变形的流变应力特征
2.
By isothermal deformation of as-cast Ti-6Al-4V (ZTC4) at different plastic technologic parameter,the regulations of deformation stress-strain and microstructure deformed have been obtained.
采用不同的塑性工艺参数对铸造Ti-6Al-4V(ZTC4)进行等温变形分析,得出变形应力-应变规律和变形后的内部组织规律;对ZTC4钛合金的原始组织进行了分析,得出原始组织形态的影响规律。
3.
An effective method for grain refining of γ-TiAl alloy was put forward based on the study results of compression behavior and microstructure evolution during isothermal deformation.
研究发现,如果γ-TiAl合金锭具有一定的细晶组织便可以在(α2+γ)2相区完成等温变形而不产生裂纹。
4) isothermal transformation
等温相变
1.
The isothermal transformation of the steel with different carbon content during the process from austenite to ferrite transformation was simulated using two dimensions mesoscale cellular automaton model.
利用二维元胞自动机介观模型对不同碳含量影响下钢的奥氏体-铁素体等温相变过程进行了数值模拟。
5) Isothermal transformation
等温转变
1.
Influence of Vanadium on Hardenability and Isothermal Transformation Curve of Spring Steel 35SiMnB;
钒对弹簧钢35SiMnB淬透性和等温转变曲线的影响
2.
The effect of cooling rate on incubation period of isothermal transformation into proeutectoid ferrite, pearlite and bainite were measured.
分别测定了冷速对奥氏体稳定性不同的五种钢种先共析铁素体、珠光体、贝氏体等温转变孕育期以及TTT曲线的影响,并对所得结果给出理论解释。
3.
The behavior of isothermal transformation in Ti-15-3 alloy has been studied by using SEM, TEM, X ray diffraction analyses and hardness measurement.
利用光学显微镜、扫描电镜、透射电镜、Ｘ射线衍射分析及硬度测量，研究了Ｔｉ－１５－３亚稳β钛合金的等温转变特性，确定了转变动力学曲线。
6) isothermal phase change
等温相变
1.
Decoupling method for solving isothermal phase change problem;
求解等温相变问题的解耦法
补充资料：单线态-单线态能量转移
分子式：
CAS号：
性质：处于电子激发单线态的能量给体，通过激发能的转移使能量受体处于激发单线态的过程。
CAS号：
性质：处于电子激发单线态的能量给体，通过激发能的转移使能量受体处于激发单线态的过程。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条