说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 加油站蒸气的回收
1)  ROSSV,recovery of service station vapour
加油站蒸气的回收
2)  tank vapour recovery
油罐蒸气回收
3)  vapor recovery
蒸气回收
4)  fuel vapor recovery system
燃油蒸气回收系统
5)  vapor recovery
油气回收
1.
Analysis and comparison of petroleum products vapor recovery technologies;
油气回收技术分析与比较
2.
A hot and key research topic for eliminating problems is focusing on the development and application of vapor recovery technology.
利用油气回收技术作为主要的降耗措施已得到重视和推广应用。
3.
In this paper,PRO II software was used to stimulate and optimize the vapor recovery system.
用PROⅡ大型过程模拟软件对油气回收系统进行了模拟优化,分析了吸收塔进液量、真空泵进口压力以及吸收塔理论塔板数对油气回收率和尾气浓度的影响,将真空泵进口压力由5。
6)  oil vapor recovery
油气回收
1.
Through the application of PROⅡsoftware,the oil vapor recovery system is simulated and opti- mized,and the impact of inlet liquid flowrate of the absorption tower and the inlet pressure of the vacuum pump on the oil vapor recovery rate and the recovery of the tower kettle is analyzed.
用大型过程模拟软件PROⅡ对油气回收系统进行模拟优化,分析了吸收塔进液量和真空泵进口压力对油气回收率和回收塔塔釜回收量的影响,将吸收塔进液量调整至13565kg/h,将真空泵进口压力调整至1kPa左右,从而使油气回收率由94%提高到98%,回收塔塔釜回收量由16316kg/h提高到16482kg/h。
2.
Through systematical comparison about the different oil vapor recovery schemes based on adsorption,it was concluded that the combined adsorption/absorption scheme is nowadays the most popular technology all over the world for large-scale oil delivery application.
通过对基于吸附法的油气回收工艺流程进行系统对比分析,揭示了吸附/吸收组合工艺是目前世界范围内油品大周转量场合的主流技术方案,吸附/冷凝组合、吸收/膜/吸附组合等变型工艺仅在某些特定场合才得以使用。
3.
The application of active carbon absorption-desorption process for oil vapor recovery in the oil loading platform of SINOPEC Yanshan Petrochemical Company and process flow are described,and the techni- cal bottleneck in operation is analyzed.
介绍了活性炭吸附解吸油气回收技术中国石化北京燕山分公司装油站台应用的原理和工艺流程。
补充资料:防静电油罐内壁涂料
分子式:
CAS号:

性质:为防止以碳钢等金属材料制成的贮油罐内壁产生和积累静电的涂料。一般采用环氧树脂或聚氨酯树脂为基料,配以特种导电材料、防锈颜料、固化剂和助剂等组成。其特点是表面电阻低、导电性好、能迅速消除静电荷的积累。此外,耐介质(水、煤油、柴油、汽油等)腐蚀性较好,胶值试验符合用户要求。适用于各种贮油罐及槽车内壁。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条