齿轮齿合,gear mesh,音标,读音,翻译,英文例句,英语词典

您的位置：首页 -> 词典 -> 齿轮齿合

1) gear mesh 点击朗读

齿轮齿合

2) complex wheel teeth gear set 点击朗读

复合轮齿齿轮副

This article has described the method of forced rubbing with high precision simultaneous gears to undergo the finish machining for the complex wheel teeth gear set.

介绍一种采用高精度同步齿轮进行强制研磨对复合轮齿齿轮副进行精整加工的方法。

3) pinion gear tooth contact 点击朗读

小齿轮轮齿啮合

4) gear mesh 点击朗读

齿轮啮合

An exact dynamic simulation of the gear mesh has come ture based on the advantage of Pro/E and ADAMS,taking the standard involute right tooth columnar gear as an example.

将Pro/E三维建模软件和ADAMS动力学仿真软件相结合,以标准渐开线直齿圆柱齿轮为例,进行了齿轮啮合的精确动力学仿真。

Comparison is made between the three kinds of bearing arrangement modes in bearing life and gear mesh.

从轴承寿命和齿轮啮合2个方面对3种布置方式进行比较。

更多例句>>

5) compound gear 点击朗读

复合齿轮

A new type of inviolate-cydoid compound gear of chainless tractionmechanism is introduced as a result of performance analysis of two kinds of cornxnongear-pin rains.

通过对常用的两种齿轮一销轨式无链牵引机构性能分析，提出了渐开线—摆线复合齿轮这一新的无技牵引机构。

And put forward a new type high torque hydraulic motor-compound gear motor, which has important application perspectives and practical value as one of high torque hydraulic motor.

综述了大扭矩液压马达的基本概念、性能指标、分类以及国内外发展状况,提出了一种新型大扭矩液压马达—复合齿轮马达,该种大扭矩液压马达有着重要的应用前景和实用价值。

更多例句>>

6) Gear engagement 点击朗读

齿轮啮合

The machining errors of gear that relate to the nature of involute are studied with gear engagement theory and combining grinding-machining in this paper and they are summarized as transmissio.

本文综合运用了齿轮啮合理论，并以磨齿加工为例，系统地研究了与渐开线性质有关的齿轮加工误差产生的啮合机理，并将其概括为传动误差、回转轴相对位置误差及刀具误差。

更多例句>>

补充资料：齿轮轮齿渐开线、螺栓、弹簧autolsp源程序

一、齿轮轮齿渐开渐开线

(defun c:gear(/)
(
setq
p0 (getpoint"输入齿轮中心p0: ")
m (getreal"输入齿轮模数M: ")
z (getint"输入齿轮齿数Z: ")
ha 1
c 0.25
a (/ pi 9)
ra(/ (* (+ z (+ ha ha)) m) 2)
rf(/ (* (- z (+ (+ ha ha) c)) m) 2)
r(/ ( * m z) 2)
rb ( * r (cos a))
ri rb
ang 0
g (polar p0 ang rb)
)
(command "circle" p0 ra)
(command "circle" p0 rf)
(command "circle" p0 r)
(command "line" g)

(while (< ri ra)
(setq
ang ( + ang(/ pi 360))
ri ( / rb (cos ang))
cta ( - (/ (sin ang) (cos ang)) ang)
g(polar p0 cta ri)
)

(command g)
)
(command )
)

二、螺旋源程序

(defun errMsg (s)
(if (/= s "function cancelled") (princ (strcat "\nError: " s)))
     ; 当命令执行时出现错误
(setvar "cmdecho" ocmdold)                                      ; 例如用户按下了CTRL + C
(setvar "osmode" osmold)
(setq *error* olderr)   ; 恢复旧的错误处理
(princ)
)

(defun c:3Dthread (/ radouter threadpitch threadlength threadangle
                   ptStart innerdiafactor radmid radinner ocmdold osmold 4H 5H 6H h6 g6)
   ;-------------------------------------------------------------------
   ; 获取公制外径大小、螺距总长
   ; 然后计算一系列几何点
   ; 并且关闭对象捕捉、命令回显
   ;-------------------------------------------------------------------
   (setq 4H (list 0.0015 0.002 0.002 0.0025 0.003 0.0035 0.004 0.005 0.006 0.007 0.008 0.009 0.010))
   (setq 5H (list 0.002 0.0025 0.003 0.004 0.0045 0.0055 0.0065 0.0075 0.009 0.010 0.0115 0.0125 0.0135))
   (setq 6H (list 0.003 0.004 0.0045 0.0055 0.0065 0.008 0.0095 0.011 0.0125 0.0145 0.016 0.018 0.020))

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

齿轮跑合啮合轮齿齿轮齿条啮合齿轮轮齿内啮合齿轮

齿轮胶合拼合齿轮接合齿轮联合齿轮组合齿轮啮合齿轮

说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
	您的位置：首页 -> 词典 -> 齿轮齿合 1) gear mesh 齿轮齿合 2) complex wheel teeth gear set 复合轮齿齿轮副 1. This article has described the method of forced rubbing with high precision simultaneous gears to undergo the finish machining for the complex wheel teeth gear set. 介绍一种采用高精度同步齿轮进行强制研磨对复合轮齿齿轮副进行精整加工的方法。 3) pinion gear tooth contact 小齿轮轮齿啮合 4) gear mesh 齿轮啮合 1. An exact dynamic simulation of the gear mesh has come ture based on the advantage of Pro/E and ADAMS,taking the standard involute right tooth columnar gear as an example. 将Pro/E三维建模软件和ADAMS动力学仿真软件相结合,以标准渐开线直齿圆柱齿轮为例,进行了齿轮啮合的精确动力学仿真。 2. Comparison is made between the three kinds of bearing arrangement modes in bearing life and gear mesh. 从轴承寿命和齿轮啮合2个方面对3种布置方式进行比较。更多例句>> 5) compound gear 复合齿轮 1. A new type of inviolate-cydoid compound gear of chainless tractionmechanism is introduced as a result of performance analysis of two kinds of cornxnongear-pin rains. 通过对常用的两种齿轮一销轨式无链牵引机构性能分析，提出了渐开线—摆线复合齿轮这一新的无技牵引机构。 2. And put forward a new type high torque hydraulic motor-compound gear motor, which has important application perspectives and practical value as one of high torque hydraulic motor. 综述了大扭矩液压马达的基本概念、性能指标、分类以及国内外发展状况,提出了一种新型大扭矩液压马达—复合齿轮马达,该种大扭矩液压马达有着重要的应用前景和实用价值。更多例句>> 6) Gear engagement 齿轮啮合 1. The machining errors of gear that relate to the nature of involute are studied with gear engagement theory and combining grinding-machining in this paper and they are summarized as transmissio. 本文综合运用了齿轮啮合理论，并以磨齿加工为例，系统地研究了与渐开线性质有关的齿轮加工误差产生的啮合机理，并将其概括为传动误差、回转轴相对位置误差及刀具误差。更多例句>> 补充资料：齿轮轮齿渐开线、螺栓、弹簧autolsp源程序一、齿轮轮齿渐开渐开线 (defun c:gear(/) ( setq p0 (getpoint"输入齿轮中心p0: ") m (getreal"输入齿轮模数M: ") z (getint"输入齿轮齿数Z: ") ha 1 c 0.25 a (/ pi 9) ra(/ (* (+ z (+ ha ha)) m) 2) rf(/ (* (- z (+ (+ ha ha) c)) m) 2) r(/ ( * m z) 2) rb ( * r (cos a)) ri rb ang 0 g (polar p0 ang rb) ) (command "circle" p0 ra) (command "circle" p0 rf) (command "circle" p0 r) (command "line" g) (while (< ri ra) (setq ang ( + ang(/ pi 360)) ri ( / rb (cos ang)) cta ( - (/ (sin ang) (cos ang)) ang) g(polar p0 cta ri) ) (command g) ) (command ) ) 二、螺旋源程序 (defun errMsg (s) (if (/= s "function cancelled") (princ (strcat "\nError: " s))) ; 当命令执行时出现错误 (setvar "cmdecho" ocmdold) ; 例如用户按下了CTRL + C (setvar "osmode" osmold) (setq error olderr) ; 恢复旧的错误处理 (princ) ) (defun c:3Dthread (/ radouter threadpitch threadlength threadangle ptStart innerdiafactor radmid radinner ocmdold osmold 4H 5H 6H h6 g6) ;------------------------------------------------------------------- ; 获取公制外径大小、螺距总长 ; 然后计算一系列几何点 ; 并且关闭对象捕捉、命令回显 ;------------------------------------------------------------------- (setq 4H (list 0.0015 0.002 0.002 0.0025 0.003 0.0035 0.004 0.005 0.006 0.007 0.008 0.009 0.010)) (setq 5H (list 0.002 0.0025 0.003 0.004 0.0045 0.0055 0.0065 0.0075 0.009 0.010 0.0115 0.0125 0.0135)) (setq 6H (list 0.003 0.004 0.0045 0.0055 0.0065 0.008 0.0095 0.011 0.0125 0.0145 0.016 0.018 0.020)) 说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条齿轮跑合啮合轮齿齿轮齿条啮合齿轮轮齿内啮合齿轮

©2011 dictall.com