1) involute rack
渐开线齿条
3) involute gear
渐开线齿轮
1.
Confirmation of the measuring teeth number of involute gear common normal;
渐开线齿轮公法线跨测齿数的确定
2.
Accurate modeling of Involute gear machined by the principle of generation of curve;
基于曲线的生成原理实现渐开线齿轮的实体建模
3.
Exactitude Modeling of Involute Gear on Pro/E;
基于Pro/E的渐开线齿轮精确建模
4) involute profile
渐开线齿形
1.
The application of extrusion processing in involute profile can not only raise the production efficiency but also enhance the strength and accuracy of involute profile.
采用挤压加工方法对渐开线齿形部分进行加工,不仅能显著地提高生产效率,而且还能提高齿形的强度和齿形精度。
2.
It forms the perfect involute profile of a gear in a polar coordinate system by gear rotation and radial linear probe movement.
对采用极坐标法测量渐开线齿形误差进行了理论分析，包括球形测头与齿面接触轨迹的分析、测量轨迹理论方程式与误差关系式的建立及影响测量精度的关键因素分析。
5) involute tooth profile
渐开线齿形
1.
Measuring methods of ultraprecision involute tooth profile;
超精密渐开线齿形的测量方法
2.
This paper introduced the involute tooth profile of the measurement method, including the standard curve method, standard track and coordinate method, and analysed the advantages and disadvantages of various methods, involute profile of the calculation, as well as its application.
介绍了渐开线齿形误差的测量方法,包括标准曲线法、标准轨迹法和坐标法,并且分析和比对了各种方法的优缺点,渐开线齿形误差的计算,以及其应用。
6) Involute gears
渐开线齿轮
1.
This article introduced the three-dimensional molding design for involute gears based on SolidWorks,and put forward four methods of parameterized entity design of gears aiming to extend the application of SolidWorks in gear fields and to improve the efficiency of gear designing.
结合计算机辅助设计/制造的需要,基于SolidWorks软件平台,对渐开线齿轮的三维造型方法进行了探讨,提出了在SolidWorks环境下实现参数化齿轮实体设计的四种方法。
2.
This paper introduces the method of realization parameterized design of cylindrical involute gears based on unigraphics NX after inducing the general structure of cylindrical involute gears, and composers can get the new needed roughcast quickly by applying the models.
在Unigraphics环境下,在归纳了常见圆柱渐开线齿轮的结构基础上,利用其成形特征和表达式功能实现圆柱渐开线齿轮齿坯的参数化设计方法,可使设计人员能应用现有的模型进行更新设计,提高设计效率,并介绍了利用表达式、规律曲线和螺旋功能实现圆柱齿轮(直齿和斜齿)的精确建模。
3.
This paper introduces in detail some measuring and determining metho ds of the parameters of the straight and inclined involute gears that are more p ractical in the actual work.
详细介绍了实际工作中较实用的直齿渐开线齿轮、斜齿渐开线齿轮参数的测量与确定方法。
补充资料：渐开线
平面上一动直线沿固定圆作纯滚动时，此直线上任意点的轨迹为该圆的渐开线(见图)。这一动直线BK称为发生线，固定圆O1称为基圆。K 的轨迹A1K为O1的渐开线。基圆越大，渐开线在相同压力角αK的某点K处的曲率半径也越大，如B2K大于B1K。当基圆趋于无穷大时，BK趋于无穷大，渐开线亦趋于直线AK。基圆内无渐开线。渐开线常用于齿轮轮齿的工作齿廓和花键工作齿廓。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条