1) rate of dilution
稀释速率
2) diluter volatile rate
稀释剂挥发速率
3) the speed of dilute
稀释速度
4) dilution rate
稀释率
1.
Influence of total solid concentration and dilution rate on hydrogensis and acidogenesis of kitchen food waste
固含率和稀释率对餐厨垃圾水解酸化过程的影响研究
2.
To aim at controlling the dilution rate and obtaining surfacing bead rich in Ni and Al,the effects of the surfacing parameters on the geometric parameters,dilution rate and composition of bead were investigated.
为了控制直流TIG电弧粉末堆焊层的稀释率,获得Ni、Al含量较高的涂层,本文研究了堆焊规范对堆焊层的形状、稀释率和化学成分的影响规律,并从降低母材温度的角度出发,考察了辅助冷源对堆焊层稀释率的影响。
3.
The result showed that the dilution rate of about 7.
2、150r/min的搅拌速度和20%的包囊添加比率时,生物反应器取得的稀释率大约是7。
5) dilution
[英][dai'lju:ʃən] [美][daɪ'ljuʃən]
稀释率
1.
Characteristic Curve of Viscosity-Dilution for PU Inks and its Applications;
聚氨酯油墨的粘度—稀释率特性曲线及其应用
2.
The commonly used direct current(DC) straight polarity of TIG arc causes large dilution of surfacing metal in surfacing process,so TIG arc of alternative current polarity is introduced and the shape parameters of the surfacing laye rs are studied.
为了降低TIG电弧堆焊时因直流正接造成堆焊金属稀释率过大的问题,尝试使用交流TIG电弧进行粉末堆焊,研究了堆焊层的成形特点。
3.
Analytical model of the dilution of clad coating was established and the expressions relating the parameters in the process were obtained.
在分析送粉式激光熔覆过程中能量分配和粉末颗粒云对激光束衰减规律的基础上 ,通过建立能量平衡方程 ,推导出熔覆层稀释率与工艺参数、材料参数之间的定量关系表达式 ,系统分析了影响熔覆层稀释率的因素。
6) dilution ratio
稀释率
1.
The effects of specific energy on the macro-size of laser-clad Ni+w(Cr_3C_2)50% composite coatings have been investigated, and the relations among laser power (P), traverse speed (V_s), preplaced thickness of layer (t_0), specific energy and dilution ratio of the clad layer have been studied.
考察了比能对激光熔覆Ni+w(Cr3C2)为 50%的复合涂层宏观尺寸的影响以及激光工艺参数中扫描速度VS、激光功率P、预置涂层厚度t、比能与复合涂层稀释率之间的变化规律。
2.
Deposition rate and dilution ratio were 10% and 95% respectively.
堆焊枪工艺性能试验结果表明,该焊枪稀释率约10%,粉末沉积率>95%,焊接质量优良。
3.
A new kind of plasma surfacing with both high deposition rate(>25 kg/h) and low dilution ratio (<5%)is introduced here.
介绍了一种新的具有高熔敷速度、低稀释率特性的等离子堆焊方法 (熔敷速度 >2 5kg/h ;稀释率 <5 % ) ,并就实验系统的建立进行了较详尽的描述 ,并提出了新型等离子堆焊焊枪的结构设计思想 ,进行了工艺实验研究 ,为进一步实现高效、低稀释率等离子堆焊工业化生产奠定了实验基础。
补充资料：稀释
稀释
又称"冲淡"。加溶剂于溶液中以降低溶液浓度的过程。稀释时常有放热或吸热现象发生，称为"稀释热"。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条