1) contact guidance
接触导向
2) guide roll force
导向辊接触力
3) contact thermal conduction
接触热导
1.
The influence of convection heat exchange and contact thermal conduction on coil annealing quality was gained,and the simulating results were experimentally verified.
为获得铝卷温度分布规律,采用ANSYS分析软件对铝卷温度场进行数值模拟,得到对流换热、接触热导等参数对铝卷退火的影响规律,并对仿真结果进行试验验证。
4) thermal contact conductance
接触热导
1.
Graphite is usually used to prevent cohesive,but the right dose of graphite should be choosed so that a good capacity of thermal contact conductance can be realized when preventing cohesive.
从理论上分析了隔离剂对接触热导的影响,并通过实验研究了接触热导随喷涂量和表面活性剂乙醇添加量的变化规律。
2.
The roller sleeve and the strip are taken as a whole according to the characteristic of thermal contact conductance exists between the interfaces of them.
建立了快速铸轧过程这类具有质量输运现象的金属凝固传热有限元数学模型,考虑了影响辊套与带坯传热的界面接触热导问题,采用大型通用有限元分析软件ANSYS对快速铸轧过程中的辊套与铸坯耦合温度场进行了仿真分析,并就不同工艺参数(铸轧区长度、接触界面换热系数、浇注温度、铸坏厚度以及铸轧速度等)对铸坯温度分布及其相变区间的影响进行了系列研究,为连续铸轧特别是快速铸轧工业实验参数设计提供了依据。
3.
With ANSYS finite element analysis software and based on the secondary development with its APDL language, meanwhile considering the thermal contact conductance between casting roller and strip, a way to conduct multi-nonlinear thermo-mechanical coupling analysis suitable for aluminum strip roll casting process was explored.
根据铝带坯连续铸轧过程瞬态凝固、流变成形的特点,同时考虑影响辊套与铸坯传热界面的接触热导问题,建立了铝带坯连续铸轧过程热力耦合有限元分析模型。
5) contact wire
接触导线
1.
Progress in Special Copper Contact Wire for Railways;
轨道交通专用铜合金接触导线的研究进展
2.
The Measurement Research for Contact Wire Geometry Parameters;
接触导线几何参数测量研究
6) contact conductance
接触热导
1.
The mathematics models of heat transfer and the temperature field between the roller and strip are analyzed through establishing the interfacial contact conductance model according to strong temperature and force coupled characteristics.
作者通过建立铸坯与铸轧辊辊套之间强温变耦合特性的界面接触热导模型及铸坯和铸轧辊辊套传热数学模型 ,对铸轧辊与铸坯的温度场进行了仿真 ,并分析了辊套的厚度、导热系数和表面粗糙度对辊套温度分布的影响 。
2.
The influnce of the surface contact conductance in crystallizing and rolling areas on the exit temperature of the strip was analysed by dividing the casting area into two segments.
将铸轧区分成结晶区和轧制区两段 ,分析了结晶区和轧制区的界面接触热导对铸坯出口温度的影响。
补充资料：导向
引导的方向：新闻工作要坚持正确的舆论导向。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条