说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 坐标中误差
1)  mean square error of coordinate
坐标中误差
2)  Errors of coordinate
坐标误差
3)  error of coordinates
坐标误差<测>
4)  coordinate error
坐标值误差
1.
To reduce the influence of the temperature variation on the measurement result of the car body-in-white laser visual measurement system,a temperature error compensation model based on coordinate error is established with a sphere target which is mounted near the base frame of the industrial robot.
为了降低温度变化对白车身激光视觉检测系统测量结果的影响,借助安装在工业机器人基座附近的靶标球,建立基于坐标值误差的温度误差补偿模型。
5)  coordinate measuring error
坐标测量误差
1.
The calculating formula of the velocity instant center coordinate in X&Y direction at random time of the working table and the coordinate measuring error of the random position on the working table which is caused by the linearity error was deduced.
为了高精度分离与修正纳米测量机工作台直线度运动和角运动误差引起的阿贝误差,介绍了一种利用速度瞬时中心进行分离的方法,推导了工作台在任意时刻的速度瞬时中心坐标计算公式,根据该公式计算出由于直线度引起的工作台上任意测量点的坐标测量误差。
6)  coordinate data error
坐标数据误差
1.
Also, it analyzes the model error and coordinate data error, presents the approach to implement the computer automatic correction, and manifests the reliability and feasibility of the method .
该文对数字化测图中棱镜偏心观测产生的原因进行了分析,归纳出棱镜偏心类型,分析偏心对数字图的精度影响,导出了坐标数据的偏心改正的数学模型,分析了该模型误差和坐标数据误差,提出了实现计算机自动改正的途径,说明了该方法的可靠性和可行性。
补充资料:【系统误差】(systematicerror)
【系统误差】(systematicerror)

亦称“恒定误差”。在同一条件下多次测量同一量时,误差的数值和符号保持不变,或在条件改变时,按某一确定的规律变化的误差。产生的主要原因:(1)分析方法不完善。如在重量分析中,由于沉淀的溶解和共沉淀现象等;在职滴定分析中,由于反应进行不完全和*等当点与滴定终点不符合等,均将系统地影响测定结果偏高或偏低。(2)仪器本身不够精确。如砝码重量、容量器皿刻度等。(3)试剂不纯。(4)操作者主观上带来的误差。如对滴定终点颜色的辨别不同等。为保证分析结果的准确度,对这类误差必须尽量减小以致消除。常采用标准试样和标准方法来进行校正,或由不同单位、不同人员测得的结果,进行对照和评价,从而得出校正系数以消除之。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条