1) X-ray detectoscopy
X射线探伤法
2) X-ray detection
X射线探伤
1.
For the X-ray detection of castings,the individual detection by plumbean house image-intensifier has been used as the main way for a long time.
通道式X射线探伤自动线,以X射线数字扫描成像器为核心,采用数字成像技术,具有检测灵敏度高、速度快的特点。
4) X-ray radiographic inspection
X射线探伤
1.
X-ray radiographic inspection on the butt joint of 10CrNi3MoV/BFe30-1-1 clad plate elbow manifestes that there are two obvious strips of linear traces on the weld and the defect is hard to be determined by weld defect assessing methods and experience.
对 10CrNi3MoV/BFe30 1 1复合板弯头对接接头进行X射线探伤 ,发现在焊缝上存在两条明显的线性显示 ,但是依据焊接接头缺陷判定方法和经验不能准确判定该线性显示为何种缺陷 ,针对这种线性显示进行研究 ,确定该缺陷显示为过渡层焊缝与复层间形成的连续空穴在X光片上得显示 ,经对坡口形式和焊接顺序进行调整 ,可以有效避免此类缺陷的产
5) X-ray crack detection film
X射线探伤胶片
6) X-ray flaw detector
X射线探伤器
补充资料：X射线探伤
Xrayradiographicinspection：使用X射线透射术进行金属材料或工件的内部缺陷（例如裂纹、疏松、缩孔等）的无损检验。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条