2) complexing capacity
配位容量
1.
Investigations of lead complexing capacity and speciation in Xihu Harbour , Zhejiang;
浙江西沪港重金属Pb的配位容量及其形态
2.
Investigation of heavy metal copper complexing capacity and forms in the Xihu Harbour of Zhejiang, China;
浙江西沪港重金属铜的配位容量和形态分析
3) in situ compatibilization
原位增容
1.
PS-g-PA6/PA6 polymer alloys were prepared via in situ polymerization and in situ compatibilization on a mixer based on PS-MMA/CL(50/50)blend system.
用原位聚合 /原位增容的方法 ,在密炼机上将PS MMA/CL共混并引发CL阴离子聚合制备PS g PA6 /PA6的共混物。
2.
The results showed that they are uncompatible between PPO,PA6 and POE; PPO g MA and POE g MA have in situ compatibilization effect on PPO/PA6 blends; PPO and POE are dispersed in PA6 continuous phase within the studied composition; and brittle.
结果表明， Ｐ Ｐ Ｏ、 Ｐ Ａ６ 、 Ｐ Ｏ Ｅ 三组份间互不相容； Ｐ Ｐ Ｏｇ Ｍ Ａ 和 Ｐ Ｏ Ｅｇ Ｍ Ａ 分别增强了 Ｐ Ｐ Ｏ 与 Ｐ Ａ６ 、 Ｐ Ｏ Ｅ 与 Ｐ Ａ６ 之间的相容性， 起到了原位增容的作用； 在本研究的组份范围内， Ｐ Ｐ Ｏ 和 Ｐ Ｏ Ｅ 分散在 Ｐ Ａ６ 的连续相中； 共混体系的脆—韧转变受控于相间的界面强度和弹性体的用
3.
Reactive compatibilization, or in situ compatibilization can be adopted to efficiently improved the compatibility between the polymer components, reduce the size of the dispersed particles and thus enhance the properties of the materials.
通过反应性增容(或原位增容)可有效地改善聚合物组分间的相容性,减少分散相粒子的尺寸,从而提高材料的性能。
4) host position
容矿层位
1.
On the basis of the metallogenic characteristi cs of the Au deposit in the southern part of Tonghua area, the host position, wall -rock alteration and ore-control structure were analyzed.
本文通过分析通化南部金矿成矿特点,并把容矿层位、围岩蚀变、控矿构造作为在通化南部寻找金矿的三要素。
5) face
[英][feɪs] [美][fes]
美容单位
1.
Aesthetic reconstruction of lesion invading adjacent multi- areaes based on subunit in face;
颜面部跨美容单位病变的修复
6) reset capacitor
复位电容
1.
The effect of the reset capacitor in the AC small signal of active clamp forward converter is analysed first,then considering the rds(on),the article deduces the non-ideal small signal based on the state-space average method,in the end the characteristics of this new model is verified by simulation.
文中分析了有源箝位正激变换器中复位电容对其小信号特性的影响,在考虑原边主管导通电阻的基础上,应用状态空间平均法,首次推导其小信号模型,并运用Mathcad仿真了该模型的频率特性,结合控制理论根之和的概念,分析了非理想条件下的有源箝位正激电路的小信号模型。
补充资料：容量位势
容量位势
capacity potential
容t位势〔卿硕ty畔ndai洲城.侧，班j吹‘u，]，于衡位势(equilibrium伪tential) 见容t(份p画ty);R角沁问题(Robin prob肠m)·
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条