1) damage ratio
堵塞比(DR)
2) blocking resistance ratio
堵塞阻比
1.
Traditional resistance model was improved and the blocking resistance ratio K_P and constant resistance ratio K_m were newly introduced to analyze the reason of microporous medium blocking.
对传统阻力模型进行改进,引入无因次系数堵塞阻比KP、定值阻比Km,考察堵塞原因。
3) blockage ratio
堵塞比
1.
Values are obtained about the total pressure distortion at several inlet exit Mach numbers,and the relationships are discussed between the inlet exit total pressure distribution and distortion indexes and the flight Mach number,the disturbed board blockage ratio and the inlet exit Mach number.
试验得到了进气道出口若干马赫数下进气总压畸变的定量数据,研究了进气道出口压力分布和畸变指数随飞行马赫数、扰流板堵塞比、进气道出口马赫数的变化关系。
2.
The performances of detonation waves in pulse detonation engine(PDE) are investigated under different structures,blockage ratios and drag coefficients of aerovalves.
通过改变气动阀结构、堵塞比及进气阻力系数,研究了其对脉冲爆震发动机(PDE)爆震波压力特性的影响。
4) Proportion ε of RBC clogging
堵塞比率ε
5) plugging
[英][plʌg] [美][plʌg]
堵塞;堵眼
6) blocking
[英]['blɔkiŋ] [美]['blɑkɪŋ]
堵塞
1.
Study on blocking of porous membrane fouling in micro-filtration;
微孔过滤介质污染中的堵塞研究
2.
Analysis of Blocking Mechanism of Southern Open Pit Chutes;
南方露天矿山溜井堵塞机理分析
3.
The influence of tube blocking of graphite heat exchanger on the production of phosphoric acid and its countermeasures;
石墨换热器列管堵塞对磷酸生产的影响及其对策
补充资料：过滤比阻
分子式：
CAS号：
性质： 在过滤操作形成的滤饼层中，距过滤介质为x处单位面积上单位质量(或单体积)滤饼(干固体)的过滤阻力称为过滤比阻，以αx，m/kg表示。即αx=Rc/wx，式中：Rc表示滤饼的阻力，l/m；wx表示距过滤介质x处单位面积上的滤饼(干固体)的质量，kg/m2。
CAS号：
性质： 在过滤操作形成的滤饼层中，距过滤介质为x处单位面积上单位质量(或单体积)滤饼(干固体)的过滤阻力称为过滤比阻，以αx，m/kg表示。即αx=Rc/wx，式中：Rc表示滤饼的阻力，l/m；wx表示距过滤介质x处单位面积上的滤饼(干固体)的质量，kg/m2。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条