1)  SWAM,stratospheric warming alert message
平流层增温警戒信息
2)  STRATALART
平流层增温警戒信息
3)  advection
平流
1.
The result shown that the cold(warm)advection and convergence(divergence)in the velocity data were interrelated with the formation,maintenance,and disappearance of the snow-fall.
结果表明:速度资料中的冷(暖)平流和辐合(散)与降雪的形成、维持和消散关系密切。
2.
The contribution of the tidal flat and tidal currents advection to the generation and growth of M4 tidal component isanalyzed by using a numerical modelling in a ideal semi-enclosed rectanglular bay.
通过半封闭矩形理想海湾的潮波运动数值模拟,分析了潮滩及平流效应对M4分潮的生成和增长的影响。
4)  tranquil flow
平流
5)  stratosphere
平流层
1.
Longitudinal aerodynamic modeling and design of state observer for stratosphere verifying airship;
平流层验证飞艇纵向动力学建模及其状态观测器设计
2.
Temporal and spatial features of atmospheric methane and its relation to ozone variation in the stratosphere;
平流层CH_4的时空变化特征及其与O_3的关系
3.
Space-time feature analysis of temperature variations in the stratosphere;
平流层各层温度变化的时空特征分析
6)  advective separation of oil
平流隔油
1.
The paper introduces the project of treatment of the oily waste water in the residue oil tank zone by advective separation of oil-blending and solidification gas-floating-coke filtration process.
介绍了采用平流隔油 -混凝气浮 -焦炭过滤工艺处理渣油罐区含油废水的工程情况 ,经该工艺处理后的废水达到国家一级排放标准。
7)  planar flow casting
平流铸造
1.
This paper introduced the two means of preparing FVS0812-planar flow casting , spray deposition and the properties of FVS0812 produced by the two ways.
介绍了FVS0812的制备方法,平流铸造、喷射沉积的工艺原理以及FVS0812在不同制备方法下的各种性能。
2.
The two means of preparing FVS0812aluminium alloy—planar flow casting,spray deposition,and the prop erties of FVS0812aluminium alloy produced by the two ways are introduced.
介绍了FVS0812铝合金的制备方法—平流铸造、喷射沉积,以及用不同方法制备的该合金的各种性能。
8)  Horizontal flow
水平流动
1.
Based on the introduction to research on RB convection method,this paper deals with its latest research progress,the stability of Rayleigh-Benard convection motiom in binary fluid mixtures,and the non-linear dynamic behaviors of Rayleigh-Benard convenction coupling with horizontal flow.
在介绍RB对流研究方法的基础上,论述了其最新研究进展:混合流体RB对流运动的稳定性及其非线性动力特性;RB对流与水平流动相耦合时的非线性动力特性。
9)  Tranquil flow
平流式
10)  Stratospheric
平流层
1.
Development of Stratospheric Airship Platform and Its Key Technology Analysis;
平流层飞艇平台的发展及关键技术分析
2.
Analysis and Simulation of Stratospheric Airship’s Fixed-Point Resident Control;
平流层飞艇定点驻留控制分析与仿真
3.
Dynamics Modeling and Simulation of Tethered Stratospheric Aircraft;
绳索平流层飞行器动力学建模与仿真
补充资料:平流
      大气风场对大气物理属性的输送过程。这是大气中的一种主要物理过程,常计算的有温度平流、水汽平流、涡度平流等。当大气中的物理属性水平分布不均匀时,平流常会引起局部地区这些属性的改变,这种变化称为平流变化(见大气动力方程)。当冷空气向暖空气方向输送时,称为冷平流;反之,暖空气向冷空气方向输送时,称为暖平流。与此类似,水汽平流可分为干(空气)平流和湿(空气)平流。涡度平流可分为正涡度平流和负涡度平流。在天气图上,根据风场同温度场、湿度场和涡度场的不同配置,可判断温度平流、水汽平流、涡度平流的性质和强弱变化。平流的强弱,决定于三个因子:①该要素(温度、湿度或涡度等)水平分布梯度的大小。梯度越大,平流越强。②风速的大小。风速越大,平流越强。③风向与该要素等值线交角的情况。交角越趋正交,平流越强;当风向与等值线正交时,平流最强。平流的强弱,可进行定量计算。
  
  实际上,引起大气物理属性改变的除空气的平流过程外,还有辐射增温或辐射冷却、水汽蒸发或凝结等许多过程。但在很多情况下,平流过程是引起局地大气物理属性改变的主要因素。例如中国的寒潮爆发,就是由西伯利亚强冷空气向中国平流所引起的剧烈降温现象。
  
  某种大气物理属性的平流,除能直接引起某地区该属性的改变外,还会间接引起其他大气物理属性的改变,以及天气系统的发生发展或天气现象的产生等。例如,高空冷(暖)平流除了使高空局地降(升)温外,还可引起高空局地气压下降(上升)和下沉(上升)运动。当某地区高空发生冷(暖)平流低空发生暖(冷)平流时,该地区的大气层结(见大气静力稳定度)将趋向于不稳定(稳定)。水汽平流除引起局地水汽变化外,对该地区的降水量也将发生很大影响。高空槽前(后)的正(负)涡度平流,除引起高空局地涡度变化外,常引起高空槽前(后)地区气旋(反气旋)的发生和发展。所以平流分析是天气分析中的重要项目之一。
  

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条