1) implement load
机具负荷
2) load sensing implement pump
负荷传感机具油泵
3) mill load
磨机负荷
1.
According to the mill characteristics and the load testing requirements, a mill load measurement and analysis system is developed.
根据磨机的运行特点和负荷测试要求,开发了一套基于LabVIEW的磨机负荷测试系统。
2.
A way is stated in this paper in which mill load can be identified with the method of AI(Artificial Intelligence) according to mill sound signal given in mill process.
由于文章篇幅限制 ,只介绍其中的磨音检测和噪声处理部分 ,磨音与磨机负荷的数学模型将在后续文章中阐
4) organic loading
有机负荷
1.
The impact of changes in organic loading and dissolved oxygen to sludge bulking of SBR and its control ways;
有机负荷和溶解氧的变化对SBR污泥膨胀的影响及控制方法
2.
Activated sludge bulking due to low pH value & organic loading and its resume;
低pH值与低有机负荷引起的活性污泥膨胀及其恢复
3.
Start-up of ANAMMOX-denitrification reactor and effect of organic loading on its performance of synergistic interaction
ANAMMOX与反硝化协同脱氮反应器启动及有机负荷对其运行性能的影响
5) Organic Loading Rate
有机负荷
1.
Effect of organic loading rate on continuous flow anaerobic activated sludge fermentation system for bio-hydrogen production;
有机负荷对连续流厌氧发酵产氢系统的影响
2.
An overall COD treatment efficiency of 98% was observed at the system organic loading rate of 12.
设计了两段厌氧处理系统来处理糖果废水,该系统由升流式厌氧污泥床(UASB)和降流式厌氧生物滤池(DFAF)组成。
3.
The organic loading rate(OLR) increased stage by stage in order to cultivate sludge.
在100 d的运行中,研究并考察了启动情况和有机负荷对其的影响。
6) organic load
有机负荷
1.
Effect of organic load on sludge granulation in anaerobic baffled reactors at different temperatures
不同温度下有机负荷对厌氧折流板反应器污泥颗粒化的影响
2.
Aiming at the characteristics of plentiful nutrition substance,high organic load of alcohol wastewater and being difficult to be treated,a treatment process of alcohol wastewater combined with resources comprehensive recycling and utilization was introduced as an engineering examples,and the running results and the economic benefits of the process were analyzed.
针对酒精废水营养物质丰富、有机负荷高、处理难度大的特点,结合工程实例,介绍了采取资源综合回收利用相结合的酒精废水处理工艺,并对工艺的运行效果和产生的经济效益进行了分析。
3.
The removal efficiency can be 65% when the influent organic load was 2.
结果表明:当进水有机负荷Nv=2。
补充资料：棒磨机
分子式：
CAS号：
性质：磨碎或研碎的一种设备。利用长度略小于磨本身的高碳钢棍棒来研磨物料。工作原理与球磨相像。由于长棒与物料的接触是在一条线上，大粒物料可使小粒物料免受挤压。因此产品比较均匀。适用于粉碎黏胶质的，不适用于粉碎韧性强的固体物料。进料大小不应超过25mm。原料必须通过电磁离析器等以除去金属硬质物料，以免损伤机件。
CAS号：
性质：磨碎或研碎的一种设备。利用长度略小于磨本身的高碳钢棍棒来研磨物料。工作原理与球磨相像。由于长棒与物料的接触是在一条线上，大粒物料可使小粒物料免受挤压。因此产品比较均匀。适用于粉碎黏胶质的，不适用于粉碎韧性强的固体物料。进料大小不应超过25mm。原料必须通过电磁离析器等以除去金属硬质物料，以免损伤机件。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条