桩的布置;桩的平面布置,pile layout,音标,读音,翻译,英文例句,英语词典

您的位置：首页 -> 词典 -> 桩的布置;桩的平面布置

1) pile layout 点击朗读

桩的布置;桩的平面布置

2) arrangement of plies 点击朗读

桩的布置

3) arrangement of pile 点击朗读

桩布置

4) pile layout 点击朗读

桩位布置

Combined with practical work,from pile layout,loading case,internal force calculation,earth-retaining and slope protection,the design of excavation stakes and other aspects the deep foundation design is introduced as well as construction measures.

结合工程实例,从桩位布置、作用荷载、内力计算、挡土护坡挖孔桩的设计多方面介绍了深基础的设计,提出了基础构造措施,阐明了带地下室的深基础采用桩墙合一、自支护逆作法施工的诸多优点。

更多例句>>

5) arrangement of pile foundation 点击朗读

桩基布置

Taking the platform of a gravity wharf as an example,and using the principle of triangle core of gravity,this paper analyzes the influence of the arrangement of pile foundation on the horizontal bearing capacity of high-level platform.

以某重件码头起重机承台为例,利用三角形重心的原理,分析桩基布置对高桩承台承受水平荷载能力的影响,对高桩码头、墩台设计有参考价值。

6) pile allocation by taking-out 点击朗读

抽桩布置

补充资料：ANSYS SOLID65环向布置钢筋的例子

ANSYS SOLID65环向布置钢筋的例子
! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1%
! 作者: 陆新征清华大学土木系
!
FINISH
/CLEAR

/PREP7
!*
! 单元属性
ET,1,SOLID65
!*
KEYOPT,1,1,0
KEYOPT,1,5,0
KEYOPT,1,6,0
KEYOPT,1,7,1
!*
!实参数1：不同方向配筋
R,1,2,.001, , ,2, .01,
RMORE, 90, ,2,.005 ,90 ,90 ,

!材料属性
!混凝土基本材料属性
MPTEMP,,,,,,,,
MPTEMP,1,0
MPDATA,EX,1,,30E2
MPDATA,PRXY,1,,.2
!屈服准则
TB,MISO,1,1,5,
TBTEMP,0
TBPT,,0.0005,15
TBPT,,0.001,21
TBPT,,0.0015,24
TBPT,,0.002,27
TBPT,,0.003,24
!破坏准则
TB,CONC,1,1,9,
TBTEMP,0
TBDATA,,.5,.9,3,30,,
TBDATA,,,,1,,,
MPTEMP,,,,,,,,
MPTEMP,1,0
!钢材基本属性
MPDATA,EX,2,,200E3
MPDATA,PRXY,2,,.27
!屈服准则
TB,BISO,2,1,2,
TBTEMP,0
TBDATA,,310,2E3,,,,

! 管道内径和外径
CYL4,0,0,3000, , , ,10000
CYL4,0,0,2000, , , ,10000
VSBV, 1, 2

! 定义局部柱坐标
CSWPLA,11,1,1,1,
KWPAVE, 11
WPRO,,-90.000000,
VSBW, 3
WPCSYS,-1,0
KWPAVE, 1
WPRO,,,-90.000000
VSBW,ALL

ESIZE,500,0,
! 注意：设定单元局部坐标
VATT, 1, 1, 1, 11
!*
VSWEEP,ALL
/DEVICE,VECTOR,1
/ESHAPE,1.0
/REPLO
! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

桩群布置打桩布置图平面布置布桩平面系数井的布置总平面布置

说明：双击或选中下面任意单词，将显示该词的音标、读音、翻译等；选中中文或多个词，将显示翻译。
	您的位置：首页 -> 词典 -> 桩的布置;桩的平面布置 1) pile layout 桩的布置;桩的平面布置 2) arrangement of plies 桩的布置 3) arrangement of pile 桩布置 4) pile layout 桩位布置 1. Combined with practical work,from pile layout,loading case,internal force calculation,earth-retaining and slope protection,the design of excavation stakes and other aspects the deep foundation design is introduced as well as construction measures. 结合工程实例,从桩位布置、作用荷载、内力计算、挡土护坡挖孔桩的设计多方面介绍了深基础的设计,提出了基础构造措施,阐明了带地下室的深基础采用桩墙合一、自支护逆作法施工的诸多优点。更多例句>> 5) arrangement of pile foundation 桩基布置 1. Taking the platform of a gravity wharf as an example,and using the principle of triangle core of gravity,this paper analyzes the influence of the arrangement of pile foundation on the horizontal bearing capacity of high-level platform. 以某重件码头起重机承台为例,利用三角形重心的原理,分析桩基布置对高桩承台承受水平荷载能力的影响,对高桩码头、墩台设计有参考价值。 6) pile allocation by taking-out 抽桩布置补充资料：ANSYS SOLID65环向布置钢筋的例子 ANSYS SOLID65环向布置钢筋的例子 ! 一个管道，环向配筋率为1%，纵向配筋率为0.5%，径向配筋率为0.1% ! 作者: 陆新征清华大学土木系 ! FINISH /CLEAR /PREP7 !* ! 单元属性 ET,1,SOLID65 !* KEYOPT,1,1,0 KEYOPT,1,5,0 KEYOPT,1,6,0 KEYOPT,1,7,1 !* !实参数1：不同方向配筋 R,1,2,.001, , ,2, .01, RMORE, 90, ,2,.005 ,90 ,90 , !材料属性 !混凝土基本材料属性 MPTEMP,,,,,,,, MPTEMP,1,0 MPDATA,EX,1,,30E2 MPDATA,PRXY,1,,.2 !屈服准则 TB,MISO,1,1,5, TBTEMP,0 TBPT,,0.0005,15 TBPT,,0.001,21 TBPT,,0.0015,24 TBPT,,0.002,27 TBPT,,0.003,24 !破坏准则 TB,CONC,1,1,9, TBTEMP,0 TBDATA,,.5,.9,3,30,, TBDATA,,,,1,,, MPTEMP,,,,,,,, MPTEMP,1,0 !钢材基本属性 MPDATA,EX,2,,200E3 MPDATA,PRXY,2,,.27 !屈服准则 TB,BISO,2,1,2, TBTEMP,0 TBDATA,,310,2E3,,,, ! 管道内径和外径 CYL4,0,0,3000, , , ,10000 CYL4,0,0,2000, , , ,10000 VSBV, 1, 2 ! 定义局部柱坐标 CSWPLA,11,1,1,1, KWPAVE, 11 WPRO,,-90.000000, VSBW, 3 WPCSYS,-1,0 KWPAVE, 1 WPRO,,,-90.000000 VSBW,ALL ESIZE,500,0, ! 注意：设定单元局部坐标 VATT, 1, 1, 1, 11 !* VSWEEP,ALL /DEVICE,VECTOR,1 /ESHAPE,1.0 /REPLO ! 注意：红色代表最大配筋方向，绿色代表其次，蓝色表示最小配筋方向说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条

©2011 dictall.com