说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 搭接(见搭接接头)
1)  lap (see Lap joints)
搭接(见搭接接头)
2)  lap joint
搭接接头
1.
The effect of each inherent strain component on the angular distortion of the lap joint is studied using inherent strain method.
运用固有应变法研究了六个固有应变分量分别对搭接接头焊接角变形的影响。
3)  overlap joint
搭接接头
1.
Research on three-dimensional visual information processing on overlap joints;
基于搭接接头的三维视觉信息的提取及处理研究
4)  lap joint
搭接,叠接,重接;搭接接头
5)  single-lap joint
单搭接头
1.
The stress and stiffness models of a single-lap joint are developed based on the linear elasticity theory considering the adherend shear deformations.
应力模型中的正应力和剪应力与有限元解吻合得较好,证明理论模型正确,参数研究中确定了影响胶焊单搭接头应力分布特征的关键耦合参数。
2.
Shear experiments of three types of single-lap composite joints,processed respectively by using RTM,stitched RTM and adhesively bonded techniques,are carried out to investigate the influences of process on mechanical properties of composite single-lap joint and failure mechanism is discussed from experimental observation.
在常温和湿热高温的环境下,分别进行了三种不同的成型工艺(RTM、引入缝纫的RTM和胶接)制备的单搭接头的剪切强度实验,研究了成型工艺对单搭接头的剪切强度的影响,并根据实验现象分析了单搭接头的剪切破坏机理。
3.
Shearing experiments were carried out to investigate mechanical properties of composite single-lap joints,processed by using the RTM techniques,and failure mechanism was discussed from experimental observation.
在常温环境下,进行了RTM成型工艺制备的复合材料单搭接头的剪切强度实验,记录并处理了实验数据;根据实验现象分析了单搭接头的破坏机理;建立了RTM复合材料单搭接头的三维(3D)有限元模型,模拟了搭接头的拉伸剪切破坏过程,并预测了搭接头破坏位置与破坏载荷,预测结果与实验现象吻合良好。
6)  lap splice
互搭接头
补充资料:黏合搭接接头
分子式:
CAS号:

性质:两个被粘物部分叠合粘接在一起形成的接头。搭接比对接形式抗剪强度高,而且可靠,是一种十分普遍使用的粘接形式。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条