1)  rocker adjustment screw
摇臂调整螺钉
2)  rocker arm adjusting screw
摇臂调整螺钉
3)  rocker arm adjustment screw
摇臂调整螺钉
4)  rocker arm adjustment screw locknut
摇臂调整螺钉锁紧螺母
5)  special exhaust rocker arm adjusting screw
专用排气摇臂调整螺钉
6)  unit injector rocker arm adjusting screw
单体式喷油器摇臂调整螺钉
7)  rocker
摇臂
1.
Mathematical modeling and optimization on rocker mechanism of automobile;
汽车摇臂机构的数学建模及最优化
2.
Failure Analysis of the Fractured Rocker in Distribution Equipment of Diesel Engine;
柴油机配气机构中摇臂构件的断裂失效分析
3.
Study on Processing Technology of Batch Production of Aluminum Alloy Rocker with Ceramic Insert Block;
铝合金陶瓷镶块摇臂批量生产的工艺技术研究
8)  ranging arm
摇臂
1.
Virtual prototype of shearer ranging arm and its dynamics analysis;
采煤机摇臂虚拟样机及其动力学分析
2.
Dangerous cross-section of shearer ranging arm is attained through theoretical analysis.
以MG710-WD型采煤机摇臂为研究对象,在两种工况条件下,用ANSYS软件对摇臂危险截面进行有限元分析,得到等效应力分布情况及疲劳寿命,为摇臂的结构优化提供理论参考。
9)  rocker arm
摇臂
1.
Study on design of machining equipment for rocker arm s deep hole;
摇臂深孔加工设备的设计研究
2.
Application of modern design techniques to aluminum die- cast rocker arm with a ceramic insert for internal combustion engines;
现代设计技术在铝合金陶瓷镶块摇臂研制中的应用
3.
The effects of technical parameters of laser surface alloying processing on the qualities of the alloyed layer of rocker arm used in motor were investigated with orthogonal test,and the factors and their levels were analyzed.
采用正交试验 ,对激光表面合金化工艺参数进行了优化 ,分析了各工艺参数对气门摇臂合金化层质量的影响。
10)  rocker lever
摇臂
补充资料:机床: 摇臂钻床
      主轴箱可在摇臂上移动﹐并随摇臂绕立柱回转的钻床(见图 摇臂钻床)。摇臂还可沿立柱上下移动﹐以适应加工不同高度的工件。较小的工件可安装在工作台上﹐较大的工件可直接放在机床底座或地面上。摇臂钻床广泛应用于单件和中小批生产中﹐加工体积和重量较大的工件的孔。摇臂钻床的主要变型有滑座式和万向式两种。滑座式摇臂钻床是将基型摇臂钻床的底座改成滑座而成﹐滑座可沿床身导轨移动﹐以扩大加工范围﹐适用于锅炉﹑桥梁﹑机车车辆和造船等行业。万向摇臂钻床的摇臂除可作垂直和回转运动外﹐并可作水平移动﹐主轴箱可在摇臂上作倾斜调整﹐以适应工件各部位的加工。此外﹐还有车式﹑壁式和数字控制摇臂钻床等。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条