说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 压力调节孔
1)  pressure regulating orifice
压力调节孔
2)  fuel pressure regulating orifice
燃油压力调节孔
3)  pressure regulation
压力调节
1.
This paper discusses a calculation method of transfer function of dynamic pressure regulation in high temperature and high pressure facilities.
讨论了高温高压设备动态压力调节传递函数的计算方法 ,求得了计算公式 ,并根据实际情况作了具体计算。
2.
A mathematic model of the pressure regulation unit for electric propulsion system is established.
建立了电推进系统压力调节单元的数学模型,利用Matlab/Simulink软件分析几个重要参数对系统的影响。
4)  Pressure adjustment
压力调节
1.
A study of characteristics of gas gap heat switch and pressure adjustment;
气隙式热开关的特性研究及压力调节
2.
Study and develpment of computer control system of reheating furnace(Ⅱ) —Control of pressure adjustment,accident alarm and self-correcting of drive actuating mechanism;
加热炉计算机控制系统的研究与开发(Ⅱ)——压力调节、事故报警与驱动执行自校正等控制
3.
The experiments and statistics indicate that the torpedo power system using pressure adjustment mode is easier to cause different kinds of failures during start-up process due to mismatching.
鱼雷热动力系统通常采用固体药柱先在燃烧室内点火再适时使燃料进入并点燃的方式实现启动,启动过程各参数变化剧烈且工作过程极为复杂,试验及统计表明,使用燃料压力调节供应方式的热动力系统在启动阶段更容易发生如热爆和无法点火等各类故障,问题主要出在系统启动过程的匹配方面。
5)  pressure adjusting
压力调节
1.
This paper discusses the problem in pressure adjusting of steam containers.
本文介绍了进入蒸汽缓冲罐蒸汽压力调节系统存在的问题 ,提出了解决方法 ,得到了满意的效果。
6)  pressure control
压力调节
1.
Two simulation models of flux control system and pressure control system in thermal power torpedo are built up via the Simulink toolbox of Matlab based on the working principles and characteristics of the systems.
根据流量调节系统和压力调节系统的工作原理和系统各环节的工作特性,通过适度合理的简化,应用Matlab中的Simulink工具箱建立了热动力鱼雷的动态仿真模型。
补充资料:胶印机串墨辊压力调节机构
CN2681895Y
    胶印机串墨辊压力调节机构着墨辊轴承座和着墨胶辊摆臂。着墨胶辊摆臂一端套接串墨辊的转轴,其上设有与着墨胶辊轴承座相配合的滑槽,限位压块将着墨胶辊轴承座固设在滑槽中。着墨胶辊轴承座和滑槽之间还设有半圆块,半圆块一端铰接着墨胶辊轴承座,圆弧面抵住滑槽底面,平面抵住设在着墨胶辊轴承座上的控制件。限位压块上设有限位件,用来辅助控制件限制着墨胶辊和串墨辊之间的压力。这种压力调节机构与现有技术相比,由于设有串墨辊压力调节机构,因此可以保证着墨胶辊和串墨辊之间均匀接触,且调节方便,制造成本低。
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条