说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 词典 -> 压实,压缩
1)  compaction [英][kəm'pækʃən]  [美][kəm'pækʃən]
压实,压缩
2)  compressible compaction
压缩压实
1.
According to compacting process of tamper device,this paper presents the principle of compaction is compressible compaction,the physical model of tamper is plane linkage mechnism,so provides theoretical foundation for design the tamper mechanism for paver.
通过对振捣机构压实过程的分析,提出振捣机构的压实机理是压缩压实。
3)  compressive experiment
压缩实验
1.
The mechanical properties of three dimensional and four-directional braided composites were investigated by the macroscopic compressive experiments.
通过对三维四向编织复合材料薄板试件的宏观压缩实验,研究了三维四向编织复合材料的抗压力学性能。
2.
The dynamic compressive experiments and quasi-static experiments were conducted on material test system and SHPB,respectively.
用渗流法向开孔泡沫铝-硅合金和泡沫纯铝中充填硅橡胶获得含硅橡胶的泡沫材料,在材料试验机和SHPB上对含硅橡胶的复合材料进行动态与准静态压缩实验。
3.
The compressive experiments are carried out respectively on the thin specimens and the soil-columns.
本文作者用不同长度的PVC管 ,在该软土层中进行取样 ,并在室内分别用薄样 (常规样 )和样柱进行了压缩实验。
4)  compression experiment
压缩实验
1.
In this paper,a bulge method which combines compression experiments and FEM simulation is proposed.
本构关系是影响模拟结果准确性的重要因素之一,本文采用一种数值模拟和压缩实验相结合的方法鼓度法,即由鼓度θ估算摩擦因子,然后通过主应力法公式去除压缩实验中摩擦因素的影响,得到6063铝合金的真实应力-应变曲线,并回归出本构方程。
2.
Quasi-static and dynamic compression experiments of carbon fiber reinforced epoxy resin matrix composite cylinder structures are implemented by NYL-200D testing machine and drop weight equipment.
利用NYL-200D型压力实验机和落锤装置对圆筒形碳纤维增强环氧树脂基复合材料结构进行了准静态和动态冲击压缩实验。
5)  compression test
压缩实验
1.
Based on a summary of the stability analysis methods of tailing dams,using seepage test,compression test and triaxial test,the research of physical mechanical characteristic of Hongjing tailing dam in Xishimen was carried out,and the characteristic curves and data were received.
本文在总结有关尾矿库稳定性分析方法的基础上,以西石门后井尾矿库为研究对象,利用渗透实验、压缩实验、三轴试验开展了堆坝材料物理力学特性试验研究,整理并得到了用于描述堆坝材料物理力学特性的试验数据和实验曲线,系统分析了堆坝材料的变形规律,为系统分析堆坝材料物理力学特性及开展坝体稳定分析提供依据。
6)  compressive test
压缩实验
补充资料:中压压缩机
分子式:
CAS号:

性质:按压力分类的一类压缩机。排气压力为0.981~9.81MPa(10~100kgf/cm2)的压缩机。其机型在活塞式、膜式、螺杆式和离心式压缩机中均有。一般用作石油化学工业中的石油气、天然气、油田气压缩机,用作油加氢精制中的氢气压缩机、空气分离中的空气、氧气压缩机,乙烯、丙烯、丙烷、焦炉气、氮气、氨气等工艺用压缩机。

说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条