1) added strength
附加强度
2) additional hardening
附加强化
1.
The result shows that 08X18H10T stainless steel has obvious multiaxial nonproportional cycle additional hardening.
对08X18H10T不锈钢进行单轴及多轴非比例循环加载低周疲劳试验及其微结构的观察,分析单轴及多轴非比例加载低周疲劳特性及其变形微观机理,结果表明:多轴非比例加载过程中,奥氏体不锈钢08X18H10T产生明显的非比例附加强化:在应变幅值较大时,塑性变形不仅通过滑移方式进行,还有孪生变形方式,微观形貌由平面状滑移向波纹状滑移转化。
2.
The test were performed for BT-9 under uniaxial and multiaxial proportional and non-proportional LCF,the results reveal that cyclic harden of BT-9 is not obvious,and non-proportional cycle additional hardening is little.
对钛合金BT-9进行了单轴,比例及非比例加载低周疲劳试验研究,结果表明:BT-9的循环硬化的程度不明显,且其非比例附加强化程度较小。
3.
The results of strain controlled LCF test under multiaxial proportional and non-proportional loadings have showed that the additional hardening effect was not obviously expressed in Titanium alloy BT9,however,the fatigue life decreased dramatically.
应变控制比例及非比例载荷低周疲劳试验结果表明,非比例载荷下钛合金BT9附加强化程度很小,而疲劳寿命降低明显。
3) Additional pressure
附加压强
1.
This paper derives the equation of additional pressure from the difference of inside and outside ball liquid level and the difference of inside and outside arbitrary flexure liquid level.
本文主要从球形液面内、外的压强差和任意弯曲液面内、外的压强差两个方面推导 了弯曲液面的附加压强公式。
2.
The additional pressure resulted from the change of surface curvature effected by HPLC6 molecules adsorbed on the surface of the ice crystal is calculated by the Laplace equation .
应用拉普拉斯方程计算了由冰晶表面吸附的HPLC-6分子影响使冰晶表面曲率发生变化而产生的附加压强,并根据一级Gibbs-Thomson方程得到了相应浓度下由此附加压强造成的热滞温度,理论计算结果与实验结果符合较好。
4) additional reinforcement
附加补强
5) additional dynamic cutting intensity
附加动态截割强度
6) adhesive strength
附着强度
1.
The Producing Principle of Adhesive Strength of Painting Road Marks with High Pressure;
高压喷涂道路标线附着强度的形成机理──美国Graco公司的高压无气喷涂工艺分析
2.
The forming nucleation, the growth and interface characteristics of diamond film on carbide substrate affect its adhesive strength directly.
硬质合金是制作金刚石薄膜涂层刀具的重要基体材料 ,金刚石薄膜在硬质合金基体上的成核、生长及界面特征直接影响其附着强度。
3.
This paper deals with the adhesive state of amorphous Ni P alloy plating using impact fracture test method and also measuring the adhesive strength of the plating quantitatively.
用金相冲击断口法研究了化学沉积非晶态镍磷合金层与基体的结合状况，并用扭转法定量测量了化学沉积合金层的附着强度参数。
补充资料：备抵附加账户（provisionandadjunctaccounts）
依据调整账户的余额方向不同，用来抵减被调整账户余额，或者用来附加调整账余额，以求得被调整账户实际余额的账户。当调整账户的余额与被调整账户的余额方向一致时，该类账户起附加账户的作用，其调整方式与附加账户相同。如在材料按计划成本核算时，需设置“材料成本差异”账户，该账户就是“原材料”账户的备抵附加当实际成本大天计划成本时，“材料成本差异”账户是“原材料”账户的附加账户；当实际成本小于计划成本时，“材料成本差异”账户是“原材料”账户的备抵账户。两者的代数和即为原材料的实际金额。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条