1) Hy-tuf steel
强勒钢
2) stiffener
[英]['stifənə] [美]['stɪfənɚ]
加强勒
3) High strength steel
高强钢
1.
Effect of CO_2 content on low-temperature toughness of weld metal of high strength steel in MAG welding;
CO_2含量对高强钢MAG焊焊缝金属低温韧性的影响
2.
Research on tensile instability of multi-gauge high strength steel laser tailor-welded blank;
差厚高强钢激光拼焊板拉伸失稳行为研究
3.
Finite element analysis of the springback in high strength steel roll forming;
高强钢辊弯回弹的有限元分析
4) high strength steel
高强度钢
1.
Development on control of hydrogen in high strength steel weld metal;
高强度钢焊缝金属氢控制研究进展
2.
Analysis about formation and microstructure of laser-welding-tailored-blanks with unequal thickness of high strength steels;
高强度钢差厚板激光拼焊焊缝成形及组织分析
3.
Precipitate Behavior of Second Phase and Structure of Annealed 1.5mm Cold Rolling Sheet of Nb-Ti Microalloy High Strength Steel;
Nb-Ti微合金高强度钢1.5mm冷轧板退火组织和第二相析出行为
5) high-strength IF steel
高强IF钢
1.
The strain-stress curve of high-strength IF steel were carried out on Gleeble-3800 thermal mechanical simulator with 10 s-1 strain rate,50% reduction and the deformation temperature at 700~1000℃.
以高强IF钢为研究对象,在Gleeble 3800热模拟机上,测定了在变形量为50%,变形速率为10s-1时,变形温度分别为1000￣700℃的应力-应变曲线。
2.
In this paper, high-strength IF steel by addition P was studied.
以高强IF钢为研究对象,在Gleeble-3800热模拟机上,测定了在变形量为50%,变形速率为10 s-1时变形温度分别为700-1000℃的应力应变曲线。
3.
The effects of cold-rolled and annealing conditions on the high-strength IF steel were studied.
研究了冷轧和退火条件对高强IF钢性能的影响,结果发现,无论在何种退火条件下,增加冷轧压下率有利于深冲性能的提高,提高退火温度对高强IF钢的深冲性能有利。
6) Refractory casting steel
热强铸钢
补充资料：强勒
1.犹强迫。强行勒迫。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条