取料装置,take out device,在线英语词典,英文翻译,专业英语

1) take out device

取料装置

2) " Fetch the material device"

“取料装置”

3) bulk sucking and taking equipment

散料取料装置

4) screw-pneumatic reclaimer

螺旋气力取料装置

5) stacker/reclaimer

堆取料机

Discussion on application of stacker/reclaimer in Isa furnace proportioning system;

堆取料机在艾萨炉配料系统应用探讨

6) reclaimer

取料机

Fatigue and mode analysis of structure of large blender-reclaimer;

大型混匀取料机结构疲劳与模态分析

30 bucket wheel reclaimer in MAGANG №2 sintering plant since its commissioning were analyzed and some modify measures were adopted.

对马钢二烧QLH60 0 3 0取料机投产以来的故障进行了系统分析 ,找出了故障发生的原因。

28 reclaimer′s bucket-wheel mechanism running,the scheme to modify it and the effect after modification were presented in this paper.

介绍了湘钢烧结厂QLK680 2 8斗轮取料机悬臂头部斗轮机构在运行中存在的问题 ,以及针对这些问题进行改造的方案设计、实施情况和改造后的效果。

7) Scoop

取料器

An Experimental Study on the Power Consumption of the Scoops in a High Speed Gas Centrifuge;

高速气体离心机取料器能耗试验研究

"The single circuit" method and its application in measure of scoop s power consumption in high-speed gas centrifuge;

“单回路”法及其在高速气体离心机取料器能耗测量上的应用

8) reclaiming bucket

取料斗

9) blank take-out mechanism

取料机构

Meanwhile, a simple and practical blank take-out mechanism is introduced in this paper, which can provide some beneficial references for mould designers.

同时也介绍了一种简便实用的取料机构 ,可为冲模设计工作者提供有益的参考。

10) stacker-reclaimer

堆取料机

Application of TRD-K series absolute coder in stacker-reclaimer;

TRD-K系列绝对值编码器在堆取料机上的应用

Through the optimization and reform of three DQLK600/1000·25 stacker-reclaimers in the sintering stock yard,the running reliability of the equipment was enhanced,meeting the need of considerable lifting of blending capacity after the technical modernization with capacity expansion for the B.

通过对烧结老区原料场三台DQLK600/1000·25堆取料机系统优化和改造,提高了设备运行可靠性,满足了高炉扩容后混匀料产能大幅提高的需要。

Taking bucket stacker-reclaimer as the example,the main technology,flow and quality control for port machine equipment installation are expounded.

本文以斗轮堆取料机为例,阐述了港口机械设备安装的主要工艺、流程及质量控制。

补充资料：取料

取料
reclaiming

qu}!。o取料(redaiming)在矿石匀化料场中用取抖机按定方式连续地从料场中取出矿石的过程。在料堆有，定堆料层数的情况下，矿石匀化效果与取料方式有关。矿石匀化料场的取料方法主要有端面取料、侧面取料和J戍部取料端面取料法取料作业在料堆的整个横断面上进行.山料堆的纵向一端开始逐渐往另一端推进。(图中。)端面取料法与人字形或菱形堆料法相配合可以得到较为理想的矿石匀化效果。端面取料法所用的取料机有桥式斗轮取料机和桥式圆筒取料机。侧面取料法从料堆的横向侧面开始取料，沿料堆的纵向往返进行。(图中b)侧面取料法与倾斜层堆料法配合使用较好，用与人字形或菱形堆料法配合使用时，矿石匀化效果较差。侧面取料法不如端面取料法的匀化效果好、故适用于对矿石匀化程度要求不高的匀化作业。侧面取料法宜用耙式取料机。底部取料法仅用于带有缝形仓口的长形料堆和圆锥形料堆。取料时，用叶轮取料机的叶片伸向料仓的底部，把其中的物料拨出仓外，卸到位于仓下的出料带式输送机上，叶轮机以一定的速度沿料仓全长(纵向)作往返移动，叶轮将物料由缝形仓中拨出;由于叶轮半堆料巍廿蘸薰鬃刻窿羹爵一堆料 {川{取鞠蘸、藻薰薰囊纵 ~攘黝~ b 取料方法示意图。一端面取料法(入字形料堆); b一侧面取料法(倾斜层料堆)径所限，它能同时切取的物料层数最多6一10层，匀化效果较差，仅适于匀化要求不高的场合。 (宋梅’牙)

说明：补充资料仅用于学习参考，请勿用于其它任何用途。

参考词条

取料主梁取料工具取料吊车混匀取料机匀矿取料机桥式取料机瞬时取料角离散矩发动机清洗枪

取料工艺取料能力取料支臂取料场堆取料中间取料
1) take out device 取料装置 2) " Fetch the material device" “取料装置” 3) bulk sucking and taking equipment 散料取料装置 4) screw-pneumatic reclaimer 螺旋气力取料装置 5) stacker/reclaimer 堆取料机 1. Discussion on application of stacker/reclaimer in Isa furnace proportioning system; 堆取料机在艾萨炉配料系统应用探讨 6) reclaimer 取料机 1. Fatigue and mode analysis of structure of large blender-reclaimer; 大型混匀取料机结构疲劳与模态分析 2. 30 bucket wheel reclaimer in MAGANG №2 sintering plant since its commissioning were analyzed and some modify measures were adopted. 对马钢二烧QLH60 0 3 0取料机投产以来的故障进行了系统分析 ,找出了故障发生的原因。 3. 28 reclaimer′s bucket-wheel mechanism running,the scheme to modify it and the effect after modification were presented in this paper. 介绍了湘钢烧结厂QLK680 2 8斗轮取料机悬臂头部斗轮机构在运行中存在的问题 ,以及针对这些问题进行改造的方案设计、实施情况和改造后的效果。 7) Scoop 取料器 1. An Experimental Study on the Power Consumption of the Scoops in a High Speed Gas Centrifuge; 高速气体离心机取料器能耗试验研究 2. "The single circuit" method and its application in measure of scoop s power consumption in high-speed gas centrifuge; “单回路”法及其在高速气体离心机取料器能耗测量上的应用 8) reclaiming bucket 取料斗 9) blank take-out mechanism 取料机构 1. Meanwhile, a simple and practical blank take-out mechanism is introduced in this paper, which can provide some beneficial references for mould designers. 同时也介绍了一种简便实用的取料机构 ,可为冲模设计工作者提供有益的参考。 10) stacker-reclaimer 堆取料机 1. Application of TRD-K series absolute coder in stacker-reclaimer; TRD-K系列绝对值编码器在堆取料机上的应用 2. Through the optimization and reform of three DQLK600/1000·25 stacker-reclaimers in the sintering stock yard,the running reliability of the equipment was enhanced,meeting the need of considerable lifting of blending capacity after the technical modernization with capacity expansion for the B. 通过对烧结老区原料场三台DQLK600/1000·25堆取料机系统优化和改造,提高了设备运行可靠性,满足了高炉扩容后混匀料产能大幅提高的需要。 3. Taking bucket stacker-reclaimer as the example,the main technology,flow and quality control for port machine equipment installation are expounded. 本文以斗轮堆取料机为例,阐述了港口机械设备安装的主要工艺、流程及质量控制。补充资料：取料取料 reclaiming qu}!。o取料(redaiming)在矿石匀化料场中用取抖机按定方式连续地从料场中取出矿石的过程。在料堆有，定堆料层数的情况下，矿石匀化效果与取料方式有关。矿石匀化料场的取料方法主要有端面取料、侧面取料和J戍部取料端面取料法取料作业在料堆的整个横断面上进行.山料堆的纵向一端开始逐渐往另一端推进。(图中。)端面取料法与人字形或菱形堆料法相配合可以得到较为理想的矿石匀化效果。端面取料法所用的取料机有桥式斗轮取料机和桥式圆筒取料机。侧面取料法从料堆的横向侧面开始取料，沿料堆的纵向往返进行。(图中b)侧面取料法与倾斜层堆料法配合使用较好，用与人字形或菱形堆料法配合使用时，矿石匀化效果较差。侧面取料法不如端面取料法的匀化效果好、故适用于对矿石匀化程度要求不高的匀化作业。侧面取料法宜用耙式取料机。底部取料法仅用于带有缝形仓口的长形料堆和圆锥形料堆。取料时，用叶轮取料机的叶片伸向料仓的底部，把其中的物料拨出仓外，卸到位于仓下的出料带式输送机上，叶轮机以一定的速度沿料仓全长(纵向)作往返移动，叶轮将物料由缝形仓中拨出;由于叶轮半堆料巍廿蘸薰鬃刻窿羹爵一堆料 {川{取鞠蘸、藻薰薰囊纵 ~攘黝~ b 取料方法示意图。一端面取料法(入字形料堆); b一侧面取料法(倾斜层料堆)径所限，它能同时切取的物料层数最多6一10层，匀化效果较差，仅适于匀化要求不高的场合。 (宋梅’牙) 说明：补充资料仅用于学习参考，请勿用于其它任何用途。参考词条取料主梁取料工具取料吊车混匀取料机匀矿取料机桥式取料机瞬时取料角离散矩发动机清洗枪
©2008 dictall.com