1) phenol ether resin
苯酚醚树脂
2) benzylic ether phenolic resin
苯醚型酚醛树脂
1.
The structure and preparing method of benzylic ether phenolic resin and the selection of raw material have been discussed, with reference to the direction in .
本文对铸造用聚氨酯粘合剂的组份Ⅰ酚醛树脂结构、合成方法、原料材料选择等问题进行了分析讨论,为铸造用聚氨酯粘合剂的组份Ⅰ的制备和苯醚型酚醛树脂的合成提供一些参考。
2.
In order to gain a better synthesizing technique of benzylic ether phenolic resin, some of factors influencing on this technology were discussed in this paper, such as the mole ratio of phenol and formaldehyde, the concentration of formaldehyde solution and the dosage of catalyst.
苯醚型酚醛树脂是三乙胺制芯工艺中的一种主要组分。
3) phenolic etherified resin
酚醚树脂
1.
To improve the image developement and imaging behavior of thermosensitive CTP (Compute To Plate),a novel inhibitational /accelerational phenolic etherified resin was synthesized.
为提高热敏CTP(Compute To Plate)版材的显影性和成像性,合成了一种新型阻溶促溶酚醚树脂。
2.
A new inhibitational/accelerational phenolic etherified resin was synthesized.
在本实验室以前的研究成果的基础上,合成了一种新型阻溶促溶酚醚树脂。
4) synthesize method of benzylic ether phenolic resin
苯醚型酚醛树脂合成
5) Benzylic ether-type phenolic resin
苯甲基醚型酚醛树脂
6) diphenyl oxide resin
二苯醚树脂
1.
Kinetics of curing reaction of benzoxazine precursors based on diphenyl oxide resin;
苯并噁嗪二苯醚树脂中间体开环固化反应动力学
2.
A novel heat-resistant adhesive based on diphenyl oxide resin modified with benzoxazine was synthesized.
合成了苯并嗪改性二苯醚树脂耐热胶粘剂 (DPO -H)。
3.
Curing shrinkage, temperature and curing enthalpy of benzoxazine based on diphenyl oxide resin were investigated.
研究了苯并 口恶嗪二苯醚树脂固化时的体积收缩率、固化温度和固化焓变等。
补充资料：纯酚醛树脂
2402树脂是由对叔丁基苯酚与甲醛在碱性催化剂存在下缩聚而制得。淡黄色至棕色不规则透明块状固体,在出料前加入草酸还原，可制得浅色的树脂。分子量为500-1000。羟甲基含量7％-10％，酸值6．0 mg KOH／g，游离酚＜2．0％。
2402树脂油溶性好，耐热、耐老化。溶于苯、甲苯、环己烷、醋酸乙酯、溶剂汽油等有机溶剂和植物油．不溶于乙醇和水。
用作氯丁胶粘剂的增粘树脂，丁基橡胶的硫化剂。贮存于阴凉、通风的库房内，远离火种、热源。
2402树脂油溶性好，耐热、耐老化。溶于苯、甲苯、环己烷、醋酸乙酯、溶剂汽油等有机溶剂和植物油．不溶于乙醇和水。
用作氯丁胶粘剂的增粘树脂，丁基橡胶的硫化剂。贮存于阴凉、通风的库房内，远离火种、热源。
说明：补充资料仅用于学习参考，请勿用于其它任何用途。
参考词条