1) main axle of penetrator
压头主轴
2) auger axis
钻头主轴
1.
At first,a extensional vibration dynamic model of the auger auger axis and drill point was established under the interaction between drill point and soil in the process of digging due to the function of exterior load by taking advantage of the elastic shaft theory and the Hamilton principle.
首先利用弹性杆理论和H am ilton变分原理建立了挖坑机钻头主轴及钻尖在工作过程中由于外激励的作用使钻尖与土壤互相作用而产生纵向振动的动力学模型,同时给出边界条件和初始条件。
3) spindle head
主轴头
1.
Pertaining to some specially-structured large-scale workpieces, the 6-axis machining is attainable by adding a spindle head to a 5-axis machining center.
对于某些结构特殊的大型构件,需要在5坐标加工中心上加装主轴头来实现6轴加工,而且在主轴头上还要安装测量探头执行测量工作,为此研究开发了专门的坐标后置处理算法。
2.
Consequently, the 5 DOF spindle head was obtained.
在基于6杆虚拟轴运动原理的复杂刀具曲面成型技术研究的基础上,将3杆并联机构进行扩展,获得了5自由度主轴头,进而构思了基于虚拟轴运动原理的7自由度串并联专用机床结构,并分析了该机构动平台的运动位姿及连杆的运动误差。
4) mainshaft gland
主轴压盖
5) pivoting spindle
摆动主轴头
1.
Three different five-axis machining center designs, double rotary table, double pivot spindle head, rotary table-pivoting spindle head, are mainly described.
介绍了双旋转工作台、双旋转主轴头、摆动主轴头加旋转工作台这三种典型结构高速五轴加工中心的特点及其应用,并综述了五轴加工技术的优势和高速五轴加工机床的关键技术。
6) adjustable spindle unit
可调主轴头
补充资料:大直径牙轮钻头
大直径牙轮钻头
大““钻头篡
说明:补充资料仅用于学习参考,请勿用于其它任何用途。
参考词条